Jump to content
SAU Community

Recommended Posts

well dropped off my car at trojasn today and pauls first thoughts is that the turbo needs replacing, so what are optiosn in this situation so im not talking to them blind. os if i could get ideas, or websites to lolok at the would be great, or if someones been in the same situation

refurbish (i guess this depends on condition or current turbo)

buy a 2nd hander

buy a garret replacement

or a new one with all new fittings

Link to comment
https://www.sau.com.au/forums/topic/221717-tubo-on-its-way-out/
Share on other sites

You could rebuild it, though that is expensive and you are still stuck with a stock turbo.

You could replace it with a 2nd hand stock turbo ~$300, no guarantee that the turbo works but its cheap.

You could replace it with a Garrett unit some are bolt on.

You could replace it with a HKS GT-RS kit. Expensive but it comes with everything and is a fantastic bolt on turbo if you only want to make ~250-260kw (provided you upgrade the support systems for it).

yeah jon straight away showed me the hks turbo, look im happy with the 194rwk, but the temptation of 240 is pretty big, plus the hks comes with braided lines and new turbo bits and pieces, what sort of supporting mods would you need for 240/260????

Fuel pump, larger injectors ( nismo 555cc / stock S15 480cc ), after market ECU. The hks kit comes with all the new oil and water lines, gaskets and such. Everything else should be fine (assuming you have FMIC, ~3" turbo back exhaust, boost controller)

Edit. Forgot about the clutch. The stock one wont like that much power :happy:

Edited by TiTAN

john probably would have told you bout the KKR turbos. john put the KKR430 on mine and im very happy with it, it feels very responsive and cheap i made 252kw with it. a friend of mine had john put on the KKR 480 and made 300 for not much more but with standard engine i stuck with the 430

i have aftermarket clutch, ecu and the other parts not sure of pump and injectors. whats the difference with kkr and gtrs hks turbos, and ben if i cold get a look at one point that would be great,

mang if you dont mind how much the 430 set u back installed, im only after 200rwkw but wouldnt mind going up to 240rwkw, lol, i like even numbers

Hks made by Garrett to Hks specs, so made in USA, ball bearing turbo, say $3000 for a kit.

KKR made by KKR in Korea, bush turbo, say $800 plus water/oil lines $250.

Give or take a few $$.

If your poor, and don't intend keeping the car - or inversely the turbo - forever, go the KKR.

If you can afford it go the HKS, its like comparing an excel to a corolla, you get what you pay for.

HPI had a write up on the KKR a while ago, issue 84.

hmmm, more possibilities this is good, why did you take it off, at what ks???

alex

I have a stock S1 turbo you can take for $200. It doesnt have shaft play (or very little that goes with oil pressure) and only did 15psi a few times, but ran near stock most of its life.

Plus you learnt u want a new clutch now (or at least adjustment on yours) hehe

If a S1 turbo works on your car, datto's sounds like the best option. I was also thinking Alex, if you were lookin at mine for a rebuild - might as well rebuild your own hehe

YGPM = you got private message!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...