Jump to content
SAU Community

Recommended Posts

hey everyone

yesterday i degreased my engine cos it was filty from puting a oil cooler in.

anyway it now as a missfire whenever the boost builds above 8 or 10 psi.

i think it must be wen i was rinsing it off some water got onto the coils/injectors/something electrical

i removed te afm's before i started

has anyone got any input? my guess is coils, but i'd like a second opinion cos i don't have the budget to replace anything thats not wrong

cheers fellas

BTW the mods that might effect this is a APFC, 550cc inj, and boost

Link to comment
https://www.sau.com.au/forums/topic/222078-missfire-above-9psi/
Share on other sites

take the coil packs out. get a hair dryer and make sure they are dry.

Check the spark plug holes, is there any water in there? if there is stick rags down there and push them in with a screw driver untill most of the water is out. Then use a vaccume cleaner to suck the rest of the water out.

Pull all the spark plugs out and clean them and dry them or replace them.

if its still failing then try a mates set of coil packs to make sure yours aint stuffed.

I have wet my coil packs many times and after doing the above they worked ok.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...