Jump to content
SAU Community

Recommended Posts

Have a R34 GT 99 Skyline Coupe (RB25DE)

Have got the Splitfires on the way and will be replacing the sparks as well...

Does anyone have a basic guide to replacing them... Have done a switch on an Rx7 before which I am told is much more difficult than the RB25DE...

Any help would be great...

Thanks

Cameron

Link to comment
https://www.sau.com.au/forums/topic/222267-r34-coil-replacement-guide/
Share on other sites

well its going to be a pain in the ass i had to change mine on my r34. now if it was turbo than you just have to remove the intake pipe but with the N/A r34 you will have to remove that whole manifold that covers the top cover. make sure you dont wreck the gasket inside or might might have to get a new one also make sure you have sealant to seal it up again.there was a few more things that need to be moved to get to it also. all up its the biggest pain in the arse eva.

i got my splitfires put in recently, and the mechanic sed the same thing "its a pain in the arse with NA" and went on to explain the same thing scott just sed so i got charged a little extra - but ppl seem to think i shouldnt have :S - but im rather happy they showed me the coils after they removed everything, it seemed hilariously painful to do

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...