Jump to content
SAU Community

Recommended Posts

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

Mod for mod a silvia/180 will always be quicker if driven properly. people often underestimate how good the SR20's are. They are one of the best performance 4 cylinder engines ever produced. 12 years after they started production and there is still nothing around that is close to its popularity or performance, other than the S15 which has now been discontinued anyhow.

Just remember that because you might have 240rwkw and you race a 180/silvia with say 205rwkw, the silvia will win, mainly due to power to weight... yes a skyline will real in top end for sure due to the 6 cylinders and extra displacement but for street driving the silvia will be much quicker.

Do an RB20 conversion on your 180! Ive raced a cat back 180 with sr and beat it by around 3 car lenghts from 50-90kmh... The only mods ive done to it are an RB25 turbo (hardly a mod, just making up for a design fault), FMIC, turbo back exhaust and a slipping clutch! I also raced an R33 with FMIC etc and beat him much to his disgust :O In terms of looks, i have a 93 180 with 18's and it looks not too bad, even with stock bodykit

Before I got the Skyline I considered the 180SX. Even after getting the Skyline I considered selling it and getting an older 180SX ('92 model or so) at half the price just to get rid of some debts.

At half the price it would have been a bargain and given absolutely more performance bang for buck, and if I wanted to be financially sensible that's exactly what I would have done. But performance wasn't what my car is all about, and for the reasons below I decided to buy/keep the Skyline:

(1) I like the shape of the R33 better. It just appeals to me more. Entirely subjective.

(2) The Skyline's interior is better (mm... velour...) Not so subjective (most people would agree), though a lot of 180SX people get around this by upgrading the seats.

(3) I've always liked straight 6's better than 4's. I like the sound better, I like the smoothness.... I dunno, I just like them. Ever since my Torana days. Not keen on V6's (which ruled out the 300ZX)

(4) There's more room in the R33 (well, for the driver and passengers, maybe not in the boot).

(5) Climate control (again I hear some people get around this by fitting S15 climate control. I think?!)

The clinching factor though, is:

(6) My motorcycle will entirely hose almost any Skyline or 180SX you care to mention.

There are some exceptions to number (6) above of course, that pretty much being any car breaking into the 9's or 10's, or capable of better than 1:38 around Eastern Creek (I can't do that time but I know someone who has done a 1:38 on the same model of bike) but they are very few and far between. And there's no way I could ever afford a 10 second car anyway even if I sold the bike and used the money to upgrade a Skyline or 180SX, so I decided to go for the "nicer" car rather than the faster one.

I still like the 180SX a lot, and 200SX only slightly less, and I'd have no problems owning one. But I still prefer the R33, partly because my bike compensates me for my need for speed, but mostly because I just think it's a nicer car.

alright .. can i get somethingg straight ?

the guys at the silvia forum say they can beat a R33 GTST with their S13/14/15 180sx with sr20det

&

the guys at the skylines forum say their R33 GTST can beat S13/14/15 180sx with sr20det ..

i dont mean to be rude or anything, but which is the truth ?

part a) ....it all depends on the car though really, and the driver, but mod for mod, the Silvia is faster, mainly because of its weight.

Just on power to weight...A silvia (1100-1200kg) with some 130-140rwkw (0.12kw/kg), should be an even match for an R33 GTS-T (1400kg) with some 175rwkw (0.125kw/kg). Both are achieved through similar mods...FMIC, S-AFC (or remap), 12psi or so of boost, and full exhaust

hehe, yup, I'm in both so i see the arguments going back and forward between the two forums on the same topic ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...