Jump to content
SAU Community

Recommended Posts

Hi just a quick question, may have been covered already if so my bad.

I have a surge tank and bosch 044 fuel pump which im putting in my car in the next couple of weeks.

No i keep hearing from my mates dont do it cause the car will smell of fuel and the pump is really noisey.

Is this true??? I plan on running teflon lines cause they contain the smell. But how noisey is the pump??? can you barely hear it or would i be better mounting it under my car with customer surge tank setup???

Any help would be graet cheers.

Link to comment
https://www.sau.com.au/forums/topic/222481-surge-tank-and-pump-question/
Share on other sites

Teflon is sposed to not weep, though Ive heard examples of the smell being present.

If you 100% want no smell, hard line it in the boot, or mount under car.

If noise is unacceptable, the usual CNC f.pump bracket you see around wont cut it IMO. You'll need a way of really isolating vibration. Iv seen a R32 with the f.pump bracket mounted to to the surge tank, with the s.tank rubber mounted to the chassis.; was pretty quiet.

Teflon is sposed to not weep, though Ive heard examples of the smell being present.

If you 100% want no smell, hard line it in the boot, or mount under car.

If noise is unacceptable, the usual CNC f.pump bracket you see around wont cut it IMO. You'll need a way of really isolating vibration. Iv seen a R32 with the f.pump bracket mounted to to the surge tank, with the s.tank rubber mounted to the chassis.; was pretty quiet.

yeah the bracket i have for the pump has a rubber surround so that should keep it quieter. will probabbly mount the surge tank to some rubber before mounting it to the chasis also.

What surge tank are you using?

just the usualk kind the ones that look like a canister, if i had a cpu at home i'd post up a pic.

044's are kinda like an angry bee :) I used a rubber lined mount with bits of rubber between the mount and the surface it's mounted too and some extra sound deadning on the rear parcel shelf under the trim and behind the seat cushions. You can hear the pump when the cars not moving at idle but when your driving you can't, road/engine noise drowns it out. As for the lines, I used all teflon ones in the boot and no smell what so ever. Bit of a pain in the ass though as the teflon line fittings are expensive and the lines don't bend as much as rubber ones.

this is my old surge tank setup

f01.jpg

i ended up removing it because of the fuel smell and the noise realli started to piss me of

this is my new surge tank setup

IMAGE_074.jpg

the surge tank is made by sard it runs the external fuel pumps are mounted inside the surge tank so it cuts out alot of the noise caused from the pumps

i also went with solid fuel lines to stop the fuel smell

lol @ angry bee, thats a good way to put it.

Mine is semi-audible... but i wouldnt call it excessive at all. With stereo on a normal level (not deafening) i cant hear the pump.

Fuel smell - i have that... BUT i have the usual fuel lines and its really not that bad i reckon...

You can buy better quality ones that dont weep, or teflon.

I cant remember the brand of fuel line, but PM Dr.Drift, Sam had them put them into a car and showed me ages ago, no smell :)

I'll grab a pic of my setup, its pretty nice i reckon... gimme a few days though as the car isnt @ home at the moment

044's are kinda like an angry bee :) I used a rubber lined mount with bits of rubber between the mount and the surface it's mounted too and some extra sound deadning on the rear parcel shelf under the trim and behind the seat cushions. You can hear the pump when the cars not moving at idle but when your driving you can't, road/engine noise drowns it out. As for the lines, I used all teflon ones in the boot and no smell what so ever. Bit of a pain in the ass though as the teflon line fittings are expensive and the lines don't bend as much as rubber ones.

yeah i heard they cost a bit but they're worth it. hmmm will have to see how i go

the surge tank is made by sard it runs the external fuel pumps are mounted inside the surge tank so it cuts out alot of the noise caused from the pumps

i also went with solid fuel lines to stop the fuel smell

where did ya get it from and how much did it cost ya cause i may head down this road. PM me if need be

lol @ angry bee, thats a good way to put it.

Mine is semi-audible... but i wouldnt call it excessive at all. With stereo on a normal level (not deafening) i cant hear the pump.

Fuel smell - i have that... BUT i have the usual fuel lines and its really not that bad i reckon...

You can buy better quality ones that dont weep, or teflon.

I cant remember the brand of fuel line, but PM Dr.Drift, Sam had them put them into a car and showed me ages ago, no smell :)

I'll grab a pic of my setup, its pretty nice i reckon... gimme a few days though as the car isnt @ home at the moment

yeah that would be cool bro cheers

I have a surge tank and bosch 044 fuel pump which im putting in my car in the next couple of weeks.

Why?

For what reason are you doing it?

Planning on some track work?

Concerned about fuel surge?

Have you thought about mounting the 044 in tank and not letting the tank get below 1/4 full?

Is that simple requirement worth the extra complexity and hassle from a boot mounted fuel refinery?

Or are you doing it just for the bragging rights?

Cheers

Gary

Why?

For what reason are you doing it?

Planning on some track work?

Concerned about fuel surge?

Have you thought about mounting the 044 in tank and not letting the tank get below 1/4 full?

Is that simple requirement worth the extra complexity and hassle from a boot mounted fuel refinery?

Or are you doing it just for the bragging rights?

Cheers

Gary

As above

044 intank FTW!

mounted properly intank its whisper quiet and still pumps fine with 5L left in the tank.

happily feed 350 rwkws.

for a fraction of the cost.

Why?

For what reason are you doing it?

Planning on some track work?

Concerned about fuel surge?

Or are you doing it just for the bragging rights?

Yeah thats why i bought it so i can brag on the net about how cool my surge tank setup is.... :(

The car will be a weekend track car.

As above

044 intank FTW!

mounted properly intank its whisper quiet and still pumps fine with 5L left in the tank.

happily feed 350 rwkws.

for a fraction of the cost.

I bought the set up brand new for less than an intenal pump. Besides dont wanna risk fuel starvation on my engine, would you???

I have a tank in my boot with braided lines and it stinks out the car, but all you have to do is open the windows and 5 mins later its gone :(

Mine is all rubber mounted but its still pretty noisy. On idle you can hear it, but cruising not really.

Like Ash said have the music on to overcome the buzzing :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...