Jump to content
SAU Community

Recommended Posts

Hey all,

Just made a trip out to the willobank test n tune, and had a few runs down the strip for my first time and it was awesome fun. Jus wondering if neone else has taken the Atmo Liners down the strip and what times u got.

My Best Run:

Reaction: .633

60ft: 2.326

KPH: 139.75

E.T. 15.815

How does this compare with the rest of you? is it ne good? i took the subs and spare tyre out for the night.

Cheers

John

Link to comment
https://www.sau.com.au/forums/topic/22267-na-14-mile-times/
Share on other sites

Congrats, good time

Just curious what speed were you pulling at 1/8 mile mark and what mods have you done to your car?

Haven't managed that yet in my car, I have a major problem with loss of traction, in 2nd I'll still get wheel spin, and even when launching at low revs.

My times were done at Meremere in NZ.

My best time to date is 16.0, mines a 4dr and I still had the tools and spare wheel in the boot.

My best speed in is 140.7KPH, and that particular run I did 16.4 (darn traction problems).

Link to comment
https://www.sau.com.au/forums/topic/22267-na-14-mile-times/#findComment-477962
Share on other sites

cheers for the feedback

i had no spare tyre or jack and took my boot install out but i still had 2 big amps in there. If i can read my slip properly it says 660 ft i was doing 68mph or 110kph. The highest speed i reached was 87.17mph or 140.29kph and i got a 16.461 on the particular run and missed 3rd but got it back in after 2 attempts... oops... poor car.

Link to comment
https://www.sau.com.au/forums/topic/22267-na-14-mile-times/#findComment-478311
Share on other sites

hey guys.

i have a vl n/a 5speed with a smallish cam.

the best time so far is 15.02 @ 148kph

this was done with two wheels, trolly jack, and a tool box in the boot. i didnt have a traction problem. lsd.

skyla.......i'm wondering how you have traction problems. wat size tires and diff do u have?

Link to comment
https://www.sau.com.au/forums/topic/22267-na-14-mile-times/#findComment-482420
Share on other sites

Originally posted by rover

skyla.......i'm wondering how you have traction problems. wat size tires and diff do u have?

I have 235x45x17 tyres all round and a LSD (4:3.1).

I'm think the problem is in the suspension, I need new shocks.

Before I changed the diff to the LSD, I was still running my old auto one (non LSD, 3:5.1) with 255x40x17 tyres, it was with this set up that I managed to get my 16 flat I got my 60ft time down to 2.389 which I felt happy about, the way it is now I don't seem to get traction:(

Any suggestions would be appreciated:)

Thanks

Rachael

Link to comment
https://www.sau.com.au/forums/topic/22267-na-14-mile-times/#findComment-482871
Share on other sites

what dya mean by u missed 3rd NA_R33?

just wondering cause ive seen it in mags and etc abt ppl missing gears in drags and i was just wondering what it meant...

how do u guys get these times and etc?

do i just drive down to my local track here in perth and tell em i wanna do a 1/4 mile anytime im freE?

cheeres guys

Link to comment
https://www.sau.com.au/forums/topic/22267-na-14-mile-times/#findComment-489299
Share on other sites

Um, pretty much yeah.

Quit motorplex has street racing meets on Sundays going again now, costs $30 from memory and gets you as many runs as you can fit in. I think they started again last week. web site is www.motorplex.com.au

Missing a gear normally means you didnt get the car in gear propperly, or went from 2nd to say, 5th gear. And its never a fun thing.

Do you all normally let tyre pressure down some for your 1/4s, if so, do you think it helps?

Link to comment
https://www.sau.com.au/forums/topic/22267-na-14-mile-times/#findComment-489363
Share on other sites

thanks man...

so say if i were to feel bored on a wednesday at 2pm and had 30 bucks to spare, i could drive out to quit and give it a go...

and the next tuesday when im bored and yet again haf nth to do i can drive out pay 30 bucks and go again?

or is it only sundays?

thanks dude

Link to comment
https://www.sau.com.au/forums/topic/22267-na-14-mile-times/#findComment-489444
Share on other sites

Originally posted by streamer

or is it only sundays?

Generally you will find its only when 'they' specify. Your $30 for 5mins of use isn't going to cover the wages of 20 people that need to be there while you run.

Link to comment
https://www.sau.com.au/forums/topic/22267-na-14-mile-times/#findComment-489591
Share on other sites

Originally posted by Darker

Do you all normally let tyre pressure down some for your 1/4s, if so, do you think it helps?

I drop the pressure a to 25psi, some people drop it as low as 20psi.

I find it does make a difference (better traction), my best times were done with 25psi in the rear tyres.

Link to comment
https://www.sau.com.au/forums/topic/22267-na-14-mile-times/#findComment-490309
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...