Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

Hi guys, just a short list of what the PFC can do that the E-manage can not..........

injection base map

injection correction map

ignition base map

ignition correction map

boost control

turbo transition

idle control

air con idle correction

power steer idle control

rev limit adjustment

injector warning

knock warning

O2 feedback

water temp correction

air temp correction

acceleration injection

cold start correction

fuel temperature correction

AFM voltage ramp correction

radiator fan control

battery voltage correction

injector size correction

injector overlap

speed limit defeat

overboost defeat

There are quite a few more, but I think I have made the point.

Hey all, if you have the e-manage with the injector and ignition harness, does the e-manage do everything that the pFC does?

Cos bottom line u want to have similar functionality for both of the units before u can really do a comparison.

If a base e-manage can only do fuel timings then it is very limited compared to the pFC. Is that correct?

I just looked up the other E-manage thread and saw they are $900-$1200 :confused: Why so much for something that's only marginally better than the S-AFC? Yes it has more potential, but at $900-$1200 you've already paid for a PowerFC which has a lot more stuff in it. I was thinking (hoping) that the E-manage was closer to $400 or $500, which is a more realistic price given its abilities.

Who sells them for $600? And the only reason I would consider getting one is because with my upcoming injector upgrade, it'd handle them better than my S-AFC if I get the injector harness. But how much is the injector harness? How much are the other optional bits?

And why is it heaps better than the S-AFC anyway? The biggest thing going for it that I can see is the extra plugins you can get, but they all cost money. I'm talking about just the base unit here when compared with S-AFC. I know that with all the extra bits it would crap all over the S-AFC, but I reckon it'd cost more than a PowerFC once you bought them all.

OK ,,,, may be over here are slow in jap ecu... but from where i come from that is malaysia... alot of my firend and work shop ask me to stay away form emange. Now all of them are selling it off cheap... some of them blow up their engine.

It is dirt cheap over there... the last thing i hear is... it is below 500 aust if you look around there....

I live in Japan and I see alot more cars with Apexi S-AFCs and PFCs. I've only seen a handful of greddy emanages in cars. By they way some of the GTRs with the Apexi S-AFC are putting out over 600hp. I only see PFCs when the power is approaching 1000hp. That's just what I've noticed.

u can get it from nengun with ignition and injector harnesses for about $608.....i think

calvintys..even a safc can blow the motor if not tuned rite..

if ur going to get a base unit get the safc....

if u r going to upgrade slowly get the emanage..

there are plenty of sites to read about the emanage..most in jap.

but read about all the add on's..as well

even with a pfc its better to get a ebc

and wif the e-01 ur going to have a very nice setup

1st of all find wot power level u want and get ur stuff to suit..

$600 with injector harness is definitely reasonable. I will consider getting one closer to my injection upgrade. (man, I hate to think of how much the middle men were making on the base units sold for $1200).

I just went to a HKS sponsered drag race a few weeks ago. Guess how many GTRs has a emanage? 0 I'm not dissing the emanage I just hardly ever see them. This is what I don't understand though. The emanage can only change the a/f ratio for 5 different RPMS, the S-AFC2 can change it for like 11 or 12 RPM levels.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...