Jump to content
SAU Community

Recommended Posts

Hi All,

I've done a bit of google farming without allot of success, so thought I would throw it to the general forum populous.

I have a R34 GTR V-Spec II. As you're aware, the V-Spec offers a couple of extra features including 2 x extra sensors and the MFD upgraded to utilise these sensors. Namely, they are the Exhaust temp gauge and Intercooler gauge.

My situation is that really I have two problems. The first problem (and if anyone can help with this, great! but it's not the main topic for discussion) is that my boost gauge is registering at 0 at all times, and does not pick up any boost. I had a friend advise me that the MFD needs recalibration, so off I went down the path of recalibrating based on Nissan instructions. The recalibration worked just fine, but it didn't fix anything - and to make matters worse, when I powered the car on after the recalibration I had lost my 2 sensors.

So it would appear that the MFD has reset to a non-V-Spec configuration, and has removed my Exhaust and Intercooler temperature gauges.

Can anyone advise on how to get them back?

As a secondary, does anyone have advice on the boost gauge problem?

I've had the car for nearly 4 months now without fault, so this is the first (and hopefully last???) for a long while I hope. Any advice would be appreciated.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/223258-r34-mfd-reset-losing-gauges/
Share on other sites

its because you ran a diagnostics on the MFD when there was no reading input for exhaust/inlet temp.

drive the car around to get your exhaust temp and your inlet temp up. then run a diagnostics.

it should look like this

vmfd3.jpg

if you dont no how to run diagnostics here it is.

Diagnostic mode

1) Turn the key to the "OFF" position

2) Push and hold the joystick

3) Turn the key to the "ON" position while still holding down the joystick

4) Release the joystick at least 1 second after the "GT-R logo" appears.

5) Click the joystick 5 times within the next 3 seconds.

This will show which sensors are functioning and have readings.

Hey mate - spot on, worked a treat.

Thanks for the great advice!

Any guidance on the boost gauge issue constantly showing neutral pressure?

Thanks

do you have any other boost readings in the car apart from the MFD?

if you do, are they all working? or is the MFD the only one with the issue.

Edited by R34NRG
do you have any other boost readings in the car apart from the MFD?

if you do, are they all working? or is the MFD the only one with the issue.

unfortunately the MFD is the only boost gauge that i have in the car... so no definitive answer there :P

unfortunately the MFD is the only boost gauge that i have in the car... so no definitive answer there :)

thats a bummer, are you running a boost controller!??!?!

all i can say is check your boost sensor in the engine bay. and make sure there are no leaks or anything.

thats a bummer, are you running a boost controller!??!?!

all i can say is check your boost sensor in the engine bay. and make sure there are no leaks or anything.

have any tips on where the boost sensor is? the car still boosts fine, it's just the gauge.

if you can give me a hand with letting me know where the things are, i'll get it checked out..

usually on the firewall, up in the corner on the drivers side. little black plastic box about the size of a matchbook. it will have a little rubber vacuum hose running to it, 1 set of wires running out too.

  • 3 weeks later...

Hi all,

Have a similar problem but not with the boost mines with front torque to be honest i think there are one or two that don't show any reading at all i have gone into the diognostic mode and front torque still lights up green so i have no idea why its not working its actually scaring me maybe my alttessa is not working???? (this is my first GTR had an EVO7 before) oh yeah my car is a R34 gtr Vspec

Sorry for hijacking but thought its relevant.

Andy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...