Jump to content
SAU Community

Recommended Posts

hey guys,

car is going into the shop for some paint approximately three weeks from now...

kit is arriving (or should do) by the end of next week...

so, to cut a long story short;

my car is white (whole car) and i was thinking about doing a typical 'Panda' spec style coordination with my car, the thing is... i don't know what to paint black!!!

i know for certain that my wheels are getting painted black, they are already chrome with a tiny bit of lip and i will leave the lip polished but paint all the spokes, from this;

http://www.californiacustoms.ch/cc/images/z18.jpg

to this;

http://www.fwt.net.au/store/images/P/tn_zinik_z18_blk-01.jpg

my initial idea was to paint the mirrors (already Carbon Fibre Ganadors that i'm picking up tomorrow) black, the Vented Bonnet black and the Bootlid black (not the whole boot, just the top part... kind of like the Mine's R34 GTR) as seen here;

http://images.superstreetonline.com/featur...e_rear_view.jpg

then i thought the car would look funny if the mirrors were black and the roof was white so i thought i might paint the mirrors and the roof black and leave the bonnet and the boot white with the rims still how i want them...

THEN i considered doing the bonnet, roof, mirrors AND boot black and then probably have to do a two tone kind of thing and have the top half of my car black divided by a nice stripe of some sort... (the strip would be above the door handle) possibly airbrushed on, again with the rims still black...

i was just wondering what kind of opinions you could all give me as i would really appreciate what you guys out there think is 'hot' and what is 'not' and before i finish off i KNOW that there will be many comments (maybe less now that i mention it) that the car is mine and i should do it as to how i please but the thing is i'm unsure, all these options have run through my mind and i just want to see how other Skyline enthusiasts weigh up such choices...

all comments will be GREATLY appreciated though i would like to see negative ones at a minimum...

i will state however that the option at the top of my list was my very first thought to just paint the bonnet, bootlid, mirrors and wheels...

(and if it makes a difference at all, i'm still remaining with the URAS kit... mine now is just a bit banged and scratched up and EVERYTHING!)

let the comments begin!

Andrew :ermm:

Link to comment
https://www.sau.com.au/forums/topic/223300-paint-for-autosalon/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

andrew stick with ur original idea man

bonnet black bootlid black to the lip part

with the ganadors i reckon u shooudl leave them as cf

gotta show off a bit of carbon rite?

hahaha

will talk to u more about it tmr

hav ea f ew other ideas for ya;)

I know I posted in the cosmetics forum, but I'll post here as well.

Do it black bonnet, roof, boot and rims. Keep the carbon mirrors carbon. But dont paint the pillars, just the middle section. Airbrushing is always good... Tribal maybe? I'll do a quick photoship when I get a chance tomorow after I get back from your place.

black bonnet, black roof, black a, b and c pillars, black boot BUT only the top

i would go a simple divider line between the white and black, possibly evolving into a simple small tribal mural at the back that wraps around to the boot

keep the mirrors CF

see if you can get hold of a CF spoiler/wing maybe just for autosalon cause that would set it off nicely

and make sure its a nice pearl white, cause otherwise it will suck ass

thanks for the response Ash...

thing is, my paint is standard white, i can't afford to paint the WHOLE car... decided i should paint because i got into a fight with a pole in the carpark when all of us went to Outback Jacks a few weekends ago...

won't be able to afford pearl, so what now?

can get CF GT Wing... but i want it to be wingless... think it looks sweet like that

Yeh, I'll do all 3 styles. Mite mix it up a bit and have some fun. Why not??

I got some decent pics of you car, so its all good. See how dark it is.

Ash, you entering ur car in the Auto Salon? Borrow some rimz... perfect!

HA

my excel looks like it been in a war

thanks for the response Ash...

thing is, my paint is standard white, i can't afford to paint the WHOLE car... decided i should paint because i got into a fight with a pole in the carpark when all of us went to Outback Jacks a few weekends ago...

won't be able to afford pearl, so what now?

can get CF GT Wing... but i want it to be wingless... think it looks sweet like that

standard white would look alright i suppose depending on the age of the paint

last thing you want is a really nice smooth glossy black top with shitty old white paint

is it a 4 door or 2 door??

otherwise if you could get one a CF boot extender lip/garnish thingo like this on the mines r34 gtr

http://www.importtuner.com/features/0711_i...r/photo_04.html

lol mine it 2 door and where the hell would i find one of those to buy?

been looking but can't find...

i don't mind painting the boot, i have to anyway after Rhys and I ripped out the wing i believe it's left holes that need to be welded bahaha

I reckon go the two tone effect with a pin stripe. I'm thinking two very thin lines right next to each other. Basically one line that has a blue side and a red side. The blue at the bottom and red at the top. This line goes down the side of the car just above the door handles and on the rear quarter it does some fancy looping to write hoony and then finish off the line. Everything above the line is black, and everything below the line is white. Now that will be unique :wacko:

I reckon go the two tone effect with a pin stripe. I'm thinking two very thin lines right next to each other. Basically one line that has a blue side and a red side. The blue at the bottom and red at the top. This line goes down the side of the car just above the door handles and on the rear quarter it does some fancy looping to write hoony and then finish off the line. Everything above the line is black, and everything below the line is white. Now that will be unique :wacko:

thats what i was envisaging - but merging into a simple tribal at the back instead :)

do everything from the bottom of your windows up - black

so bonnet, mirrors, boot top, wing, roof.

that would look mint i reckon, white car with black top.. was planning to do this to my car when it arrives :)

cf hood..cf mirrors...roof black..boot black...

with some nice black rims with chrome lip... mmmmmmm SEXY

Edited by viet_boi
do everything from the bottom of your windows up - black

so bonnet, mirrors, boot top, wing, roof.

Lucy, lovin your idea! would keep the mirrors cf though. Also do a black pinstripe just below the black/white seam maybe? shame you can't afford a white pearl as it would look mint contrasted with a gloss black. Maybe hold off the paint til you can afford it? How dark is your window tinting? The rims are going to look great, btw.

had a chat to the painter today, he said it would look nice but if i want to do the pinstripe idea i would have to end up doing the rest of the car...

well i don't HAVE to but he said that he refuses to do my car if i don't do the rest because there will be some chipping or something (he used some word) and the paint won't blend through properly, so depending on how much money i can get will decide if i can do the pinstripe idea...

as for the initial idea, looks like i'm doing the bonnet, boot and rims... leaving the mirros CF...

good enough?

i'll need at LEAST another whole grand to do the roof with pinstripe idea and thinking about it that's not a lot compared to getting a whole new look, i just can't bloody afford it right now :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...