Jump to content
SAU Community

Recommended Posts

i have a gtst r33, series 1 skyline. wondering the best route to go to turn up the boost on the stock snail. i was told the greddy profec requires an hks fuel cut eliminator....

is there a boost controller that takes care of raised fueling needs?

i feel like a total retard going from high comp NA hondas to boosted nissans.

thanks for the help.

How is the condition on your turbo? Stock or Aftermarket?

I think R33 have ceramic internals for their turbos, so don't go too hard.

If you got aftermarket turbo you can go a bit more boost.

Then you might need a front mount intercooler.

I don't have much experiance with boost controllers, but Im sure the big brands like APexi, Blitz and HKS will do a good job.

Ppl then might say you need a APexi Power FC to map out your air / fuel mixtures.

How is the condition on your turbo? Stock or Aftermarket?

I think R33 have ceramic internals for their turbos, so don't go too hard.

If you got aftermarket turbo you can go a bit more boost.

Then you might need a front mount intercooler.

I don't have much experiance with boost controllers, but Im sure the big brands like APexi, Blitz and HKS will do a good job.

Ppl then might say you need a APexi Power FC to map out your air / fuel mixtures.

turbo should be ok, car has very low miles. im not looking to get ridiculous. i am getting a FMIC in a week, thats why i am asking, because i know with a front mount, i am going to get a pressure drop.

i guess stock is something like 4psi to 8psi dual stage(you guys use metrics?) and im lookin for i guess something like 12psi on the stock turbo with a front mount.

that should hold me over til i pick up a atermarket manifold, turbo and external wastegate.

just go get a maunual boost controller for ya local rev head store and you can safly wind her up to 11-12psi if you got a front mount really limits of the stock turbos rear wheel, there is a thred in diy on installation of a manual boost controller

turbo should be ok, car has very low miles. im not looking to get ridiculous. i am getting a FMIC in a week, thats why i am asking, because i know with a front mount, i am going to get a pressure drop.

i guess stock is something like 4psi to 8psi dual stage(you guys use metrics?) and im lookin for i guess something like 12psi on the stock turbo with a front mount.

that should hold me over til i pick up a atermarket manifold, turbo and external wastegate.

just go get a maunual boost controller for ya local rev head store and you can safly wind her up to 11-12psi if you got a front mount really limits of the stock turbos rear wheel, there is a thred in diy on installation of a manual boost controller

If you get the correct size intercooler, boost lost should be a problem, I don't think..?

BTW ppl talk about removing the boost restricter in the hose going to the boost solenoid... There is talk about this on GTR's but have a look at the GTS-T.

The restricter is a little cylender inside the hose with a smaller diametre in resulting in a boost restriction. Squeeze the cylender out and plug the hose back in and you should get a Factory Safe Boost Increase.

I haven't found any solid evidance to prove this and best is to ask your mechanic.

Someone might wanna clear this up for me...

when i read you guy's posts, i read them wit han australian accent in my head. is that weird?

Mate! Get da farken boost up!

Stop beeina weak karnt!

LOL! :banana::banana:

Whatever helps you understand I guess... LOL!

Edited by (00)SKYLINE(00)
when i read you guy's posts, i read them wit han australian accent in my head. is that weird?

Probabally no weirder then the mental picture I get, of a slow stuttering Texan drawl, handgun in one hand, bible and 1st amendment flailing in the other... from reading post by Yanks :P lol

Edited by GeeTR

No boost restrictors in 33 gtst's that I know of.

They do run a dual-stage solenoid though. Have a look in the DIY section there should be an easy mod to make it run 7psi all the time instead of 5psi then 7psi. After you've done that get a Turbotech manual boost controller and wind it up to 12psi.

She'll be right mate.

Hey T.

Where are you from in the states.

Which liner do you have?

I'm from NYC but moved here from Vegas.

I have a gtst 96.

But I am an American...LOL

LOL! Your profile says your from Sydney...

No boost restrictors in 33 gtst's that I know of.

They do run a dual-stage solenoid though. Have a look in the DIY section there should be an easy mod to make it run 7psi all the time instead of 5psi then 7psi. After you've done that get a Turbotech manual boost controller and wind it up to 12psi.

She'll be right mate.

this is the route im going, i ditched the little hose from the boost solenoid to the "t" fitting with the restrictor in it, by passed the coolant hose thru the throttlebody and tonight i am ditching the dual boost gimmick, looking for a manual boost controller and a boost gauge tonight as well. that should give me enough kick in the ass until i put a top mount, garret, FMIC.

thanks for the help.

Probabally no weirder then the mental picture I get, of a slow stuttering Texan drawl, handgun in one hand, bible and 1st amendment flailing in the other... from reading post by Yanks :) lol

thats 12% of the country, but hey, you guys have your "mick dundees" like everyone else too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the suggestion of being on it. As the car has a break in tune, I went and hit 10psi a few times while driving, drove it kind of like a jack ass for ~1.5 hours, did another test, and all 6 cylinders were at/just below 125PSI. I took photos of it this time as I only my memory to remember seeing 150psi. As for the ones that were low, my battery is kind of shot and dies pretty quickly if not charged, so I'm going to assume I just didn't let them build up enough compression or the battery didn't have the power. The 150psi for #4 is definitely odd, but having no photo proof, I'm just going to make note of it. I'll retest it again when the car is cold to see where things are, but everything is insync now so 🤷‍♀️
    • Yep will do. Thanks! I'm keen to do a next update.
    • I've thought about DCT, and I think in pretty much every way sequential wins. You still have a pedal clutch, which means you can make it take off exactly how you want. There's no computer trying to work out if you're about to go up or down a gear. Without looking at the math, I reckon sequential will be a quicker shift. How they're setup, both can only go up or down 1 gear at a time. Did I mention no computer needed, so it can't ruin your day with some weird edge case with the sequential? I've not really ever found an auto box I've ever been 100% happy with even in normal daily duties, and the few DCT vehicles I've driven have the same issue. I would be intrigued to take a crack at reprogramming a DCT and seeing how well I can truly ruin my day for myself...
    • The stealth of it is sick. Custom tow bar I assume?
    • These are also true. I do try to separate myself from the rest of society though. I'm starting to get evil DCT scented dreams though.
×
×
  • Create New...