Jump to content
SAU Community

Recommended Posts

This car must sell as i work all around Australia and have no time for it anymore. there's not much mechanicly to do to finish off.... Parts include:

180sx RB20DET

Rollin Shell

Is in good condition some minor dings and scratches

Tein coil over suspension all round

600 x 300 x 100 intercooler with 3" inlet and outlet

5 stud conversion s14 up front with breaks

R32 rear hubs (no rotors)

Fuel System

Billet surge tank with bosch 044 fuel pump bracket

Skyline in tank fuel pump

Push on speed flow fittings for surge tank and pumps

Half inch fuel line from pumps to the front of the car

Braided speed flow from half inch to fuel rail

Modified fuel rail to twin feed

550cc injectors

SX fuel pressure regulator

Drive Line

R33 5 speed gearbox

OS Giken twin plate button clutch

Billet Fly wheel

All new gearbox bolts

R32 full spooled diff with 4:11????

Needs a one piece tail shaft (for strength)

There is a tail shaft 32 - s13

Modified gearbox cross member (new bolts)

Engine

Full house machine work

Polished, nitrided and cryoteched Crank

Cryoteched R32 conrods

CP 30 thou over pistons (brand new)

Over sized gudgen pins

Commetik steel head gasket

Total seal CP piston rings

Extreme head porting and polishing

Titanium valves, valve springs and valve seats

HKS stage 3 cam gears

HKS cam gear pullies

New oil pump housing modified for dry sump

New water pump

Polished rocker cover, crank angle sensor

Engine Cont'

Peterson stage 4 dry sump pump

Peterson dry sump tank 3L?

Stainless steel top mount turbo manifold

R32 GTR inlet plenum modified

Solid mounted engine mounts

XTR GT35R roller bearing turbo oil and water cooled

Electronics

Mircotech LT-12s computer with extra long cord for hand controller

Computer has about $1000 worth of tunning time with three tune settings

Pump fuel

Pump fuel + Toluline

C16 race fuel

Standard coil packs (have been rated at 800bhp)

Boost gauge

Air/Fuel ratio gauge

Turbo timer

NO time wasters this must sell asap $15000 or ONO

Please call me on 0401 419814 or Pete on 0404479491

post-52336-1213319123_thumb.jpg

post-52336-1213319149_thumb.jpg

post-52336-1213319183_thumb.jpg

post-52336-1213319214_thumb.jpg

post-52336-1213319285_thumb.jpg

post-52336-1213319331_thumb.jpg

post-52336-1213319364_thumb.jpg

post-52336-1213319385_thumb.jpg

post-52336-1213319406_thumb.jpg

post-52336-1213319428_thumb.jpg

Sorry mate im in Brissy not to much is needed BOV External Waste Gate.. Speed flow for dry sump and tank,2 x bosch 044 fuel pumps, exhaust and cooler pipes and tail shaft to get it running.... and will organise delivery if needed...

Edited by 23RIL

before i bought it and rebulit it, this build has previously made 584 rwhp on c16 tune which to my knowledge is still the highest HP for an RB20DET in australia... the injectors are a 550cc item.... This must sell and the price will drop untill sold......

Edited by 23RIL
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...