Jump to content
SAU Community

Recommended Posts

made me cross over to the dark 2j side :)

pshh dark side my ass... nothing good ever comes from a 2j... what happened to all those fun times disassembling nissan motors after they start rattling and constantly fixing lil shit and getting no where.

that's where the shits at! never seen a toyota motor give its owner such wonderfull lengths of bonding time.

Edited by SkyHi_33
pshh dark side my ass... nothing good ever comes from a 2j... what happened to all those fun times disassembling nissan motors after they start rattling and constantly fixing lil shit and getting no where.

that's where the shits at! never seen a toyota motor give its owner such wonderfull lengths of bonding time.

plan is to crack 300rwkw on a stock bottom end...then push 400 which will result in plenty of bonding time :)

plan is to crack 300rwkw on a stock bottom end...then push 400 which will result in plenty of bonding time :)

haha it will take it... if an rb can take 300+ on a stock bottom end you should be perfectly fine.

and sice this is a photo thread, my new fav as of last night hehe

r331.jpg

haha it will take it... if an rb can take 300+ on a stock bottom end you should be perfectly fine.

and sice this is a photo thread, my new fav as of last night hehe

r331.jpg

Nice new guards! Whens the paint work gettin done ?

Oh and i ope it lasts...with what i have planned for it lol.

haha its getting rubbed down and primed end of next week before all jap day, gonna be in the show slammed as low as it will go. Getting painted sometime in March when I get around to it.

20022010112.jpg

this would be one of my favourite ones this week....

it means Marv is coming back out into the world after a 3 year 2 moth, 17 day and 11 hour lay-up in the shed...

woot woot!

  • 2 weeks later...
IMG_2301.jpg

IMG_2305.jpg

04.jpg

IMG_2689.jpg

just a few of my fav of mine...

but as she is now im not so proud, well doesnt look too hot as im in the middle of doing a few bits but here it is as she sits now :)

01-1.jpg

i know im not from south aus or anywhere in aus for that matter but i stayed there for 6 months a while back so though id throw them up :D

wow been a long time since i was on here, well above is how my car was before, think i better update it, seen as its slightly different now :D

firstly how she started out when i first got it.... :wallbash)

892643_20080117030150_1.jpg

:hmmm)

best get going at it then this is the lady today....

IMG_0432.jpg

IMG_0466.jpg

IMG_0445.jpg

IMG_0486.jpg

IMG_0473.jpg

IMG_0463.jpg

IMG_0420.jpg

let me know what you think then.

Because of the side skirts coming out as much as they do, I really think to finish it off stick a 10mm spacer behind the rear wheels and it will complete the whole overall look of the car :thumbsup:

^ that is very nice mate!

thanks

Because of the side skirts coming out as much as they do, I really think to finish it off stick a 10mm spacer behind the rear wheels and it will complete the whole overall look of the car :cheers:

thanks, yeah ive been thinking the same about the spacer, but i need a little arch work for the wheels to sit right as the standard arch was left when the 400r were put on, so they will rub like fook if i just stick a spacer on..... :thumbsup:

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...