Jump to content
SAU Community

Recommended Posts

Taken shortly before the wheels got a new paintjob :)

281642_274656205882223_152317291449449_1277357_7329936_n.jpg

are you changing wheels down the track? also you had a wood screw sticking out of your skirts at the dyno day. i poked it back in, hope thats ok

Heres a semi current one of mine. boot and roof spoilers are still at the painters. ignore my skills on Paint

post-71986-0-02901200-1313395715_thumb.jpg

are you changing wheels down the track? also you had a wood screw sticking out of your skirts at the dyno day. i poked it back in, hope thats ok

Heres a semi current one of mine. boot and roof spoilers are still at the painters. ignore my skills on Paint

Yeah she's shopping around for a new set of wheels... looking for something with ridiculously low offset ain't easy hey!

Noticed your car having a bit of trouble starting on the dyno day... key banging it neh neh neh neh neh how embarassing. What was the problem?

and on topic, not sure if I've posted this but I love this pic of my GTR :thumbsup:

205938_274633695884474_152317291449449_1277285_3104244_n.jpg

Back on topic...nice shot Kahli, love the grey grunge-urban-industrial feel to the backdrop.

I was driving her car around the City and noticed a funky looking alley way so I went down there and took that photo - turned out well I reckon, came out how I imagined!

Didn't realise you were an official spokeman too vu. How cute. Yeah alarm playing funny games being sorted tomorrow. Not really embaressing when you expect it. Looking fpr wheels to fit would be easy. Post the size and offset you need and ill find some. While your speaking for her I don't understand the plates? Was VIVA R taken?

Shouldnt have painted the wheels. The orange looks horrid. Silver looks so much cleaner, simpler and more pleasing to the eye.

what's going on around here.......read my post directly above yours and be thankful you don't get a holiday.

if this shit continues to go down, I don't care who you are, your next stop is a week in Siberia with an official warning

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
×
×
  • Create New...