Jump to content
SAU Community

Recommended Posts

Hi everyone,

just wondering if i could ask a favour from any R34 owners out there with FACTORY XENON headlights (NOT aftermarket H1 kits to deal with butchered compliance headlights).

I've never actually seen what the factory lights are like at night and was wondering if anyone would be so kind to take a pic of their car at night, facing a wall, garage door, etc... preferably not parked too close to the wall/door.

Basically i want to see what the cut-off and beam pattern is like, etc....

cheers!

daniel

Link to comment
https://www.sau.com.au/forums/topic/224946-a-little-help-from-r34-owners/
Share on other sites

  • 1 month later...

Mine were put back in after compliance and they are sweet i would never buy another car without them they are brilliant for night driving. Hope this is what you were after my camera sucks tho. The drivers side one points lower but they throw a huge beam and bright as f$#k you can barely look at roadsigns you drive past there that bright

Picture143.jpg

Picture144.jpg

Picture145.jpg

Edited by AndyD

what year is your stagea?? i'd also doubt they are projectors.... OEM Xenon projectors look like this...

gallery_1486_103_217836.jpg

i appreciate the post ;) but every reflector assembly has a different light patern, so i was kinda chasing someone with OEM R34 shots. Having said that though, we might have diagnose something with your car that needs to be checked...

The more i look at the front pic of yours, the more i think they're not Xenon. You should be above the cut-off line there with the angle you took the front shot, but you can still see a fair amount of glaring. This is a hallmark of an aftermarket HID kit in a reflector assembly not designed for it. A Xenon bulb (D2s, D2r, etc) has a certain light "signature" and the reflectors are designed to suit. You put in an H1 or whatever globe, the "pattern" of light doesn't match up and you get flaring everywhere, hot spots, etc.

The front shot does make the light look too yellow to be Xenon, could just be the pics

Is there a way to check like a part number or something. They look a little yellow cos of the parker globe which sits directly below the xenon,plus my camera sucks really bad and it was taken with the flash on. When looking at them they really are a purple/blue color,im not doubting what your saying but the camera really doesn't do justice to how it really looks if there is a way to check let me know and i'll check it out as it was listed on the auction sheet as xenon's so if they aren't i will be just a little bit pissed off. Oh and it is a 1999 series 2 stagea

well i just picked my car up from the panelshop thisarvo n the replacement headlight they put on is HID but the one they didnt replace is ye-olde compliance hack job so ill try n get some photos before i get a replacement light. dont own a camera so have ta try n get my mates one.

My r34 has xenons, will try to take a photo tonight...but there are like 4 modes you can adjust the xenon.

I havent really worked out what these modes actually do except they kinda differ in height a little.

PM me if i forget. lol

Edited by JI34GT
Is there a way to check like a part number or something. They look a little yellow cos of the parker globe which sits directly below the xenon,plus my camera sucks really bad and it was taken with the flash on. When looking at them they really are a purple/blue color,im not doubting what your saying but the camera really doesn't do justice to how it really looks if there is a way to check let me know and i'll check it out as it was listed on the auction sheet as xenon's so if they aren't i will be just a little bit pissed off. Oh and it is a 1999 series 2 stagea

Andy, they come from the factory with Xenons, same as virtually every R34, but because they're not auto-leveling and don't have a washer function, they don't meet ADRs and are removed during compliance.

The easiest way to tell is point the car near a wall and watch what they do when you turn them on - Xenons will light up a bit like a street light - take a few seconds to reach full brightness.

JI34GT - that knob is to adjust the height of the beam, nothing else.

Edited by Iron Chef

i have Xenons on my R34 and there excellent and give such a better light then standard. i can try and get a pic of mine today or tonight. but i would reconmend them. if ur thinking of getting a set.

But ill warn you now, a new set of R34 xenon headlights will cost min of $2500 or about $1200 for second hand set.

adam

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...