Jump to content
SAU Community

Recommended Posts

I've got the turbos out of the road car and one of them, I can't tell which is blowing smoke through the exhaust.

I'm on a tight ass budget here, and while I can get the standard R32 turbos rebuilt, I'm not a big fan of the ceramic wheels so I'm a little reluctant to spend money on them.

My goals are not power orientated. This is my road car, daily driver, to and from car. I've got race cars which I play with, so I'm after economical in both purchase and running. Immediately after finishing this post I'm moving on to putting the new KME lpg system in to the car so that should give you an idea where I'm coming from.

I've checked on getting steel wheels on the T28s and that's going to run about $1k each, which is not in the budget. I can get N1 wheels for about $1250, but again, that's not in the budget.

My thoughts are using a set of turbos off a pair of SR20s in the RB26. I believe they are steel wheel, and/or there are cheap Chinese turbos out there for about $300 each. I'm not afraid of using the Chinese turbos, the quality has increased greatly on these things and I do all the work myself, so if the thing shits itself, It's just a little more time for me in the shed.

So big question is, has it been done, and what are the possible problems. As it is, I believe the exhaust inlet flange is the same, but I can't tell on the exhaust outlet. I believe that air inlet is the same, but I'm not sure if the angle is right, and I know that air outlet flange is different, but that won't be too hard to change.

Must be a few people out there that have done the reverse from GTR to RB20, any help would be appreciated.

not exactly the answer ur looking for but from what i have seen you can get a pair of gtr turbos second hand for about $400...

why not sell the sr20 turbo's and buy some gtr turbo's?

Theres nothing wrong with the ceramic wheels if its just a road car.

Buy a second hand set for sub 600 bucks and be done with it.

There is a pair of R34 turbos in the for sale section for stuff all.

SR20's have a different exhaust housing and the compressor housings are also different. I dont know if the comp housing is interchangable with the GTR but the exhaust is not due to the wheel diameters.

Haven't got anything yet, so I'm just looking at ideas for the moment.

Are you sure the casting on the rear of the turbo is different? From pictures the rear housing seems to be the one thing that is common among the 2, in both inlet and outlet.

The front housing is totally different, it seems the mounting holes for the inlet are out by 90 degrees. Led me to wonder if a GT28 hat off an old GTR turbo could be easily machined to fit. They should by rights be similar.

Still might go the old ceramic route, but my main concern is that the occasional higher than normal squirt of boost could make the thing come apart. I usually run around 14-15 psi, which is more than recommended for the ceramic wheel turbos. A newer set of turbos could make this a less likely problem.

Thanks for the advice.

SR20 wont fit and housing wont change over as wheels are differrent.

Wheels are different for sure, but they can be machined to match provided the hats are of the same diameter and the profile of the t28 is not larger (can take material away, but adding is harder :blush: ).

All pie in the sky at the moment, but I'm curious

Turbos native to or intended for twin RB26 std manifold apps have the unique or what Garrett call "compact" T25/28 or GT25/28 turbine housings . The dump flange pattern is different to generic GT25/GT28/SR20 .

The compressor housings are designed to suit the RB26's air in/out and they have the two mounting eyes for RB26 turbos fluid plumbing fittings .

With the amount of work involved in removing and replacing RB26 turbos I'd be wanting to be real sure that they were designed to work properly on that type of engine .

Cheers A .

Yep, starting to sound too hard. Not one to shy away from a challenge, but in the midst of an engine rebuild, 2 race car builds, and an LPG installation on the go, it might be worth putting it on the back burner.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...