Jump to content
SAU Community

Stock Rebuild Rb25det

tin-pain

By tin-pain,
in Engines & Forced Induction

 Share

Recommended Posts

NYTSKY Grand Master

NYTSKY

Posted
Posted
hi guys,

as topic states i am wondering how much people have spent on stock rebuilds from bottom up.

im buying a a complete motor soon and was just wondering how much it would cost me.

cheers

If you are going to the trouble of doing a full rebuild you might as well throw some forged pistons,upgraded bearings and studs.

Whats the point of buying a shagged motor when all your doing is building it to stock spec? You would be better off buying a second hand motor which is good condition.

NYTSKY Grand Master

NYTSKY

Posted
Posted

If you dont have the money to put forged pistons in it then dont rebuild it. Use half the money you would need for the rebuild and buy a good second hand motor. A basic rebuild will cost you about 4-5k.You can get a good second hand motor for 1.5k then use the rest for mods or better yet fuel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sinn3r
      R34 Skyline climate control unit transistor

      By sinn3r · Posted

      Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Rezz
      WGNC34 - floor mats

      By Rezz · Posted

      Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      Thanks GTSBoy, much easier to work with it now it's free!  
    • GTSBoy
      Starting again

      By GTSBoy · Posted

      I _think_ that one has a christmas tree or some other retainer spike into a hole in that panel under it. Come in under it with thin scredrivers and just pry it gently up. If you rip the ears off the retainer pin....so what? Just stick it back down after with a bit of race tape and carry on with life.
×
×
  • Create New...