Jump to content
SAU Community

V35 Rusty Exhausts?

steveyc
 Share

Recommended Posts

johnr Enthusiast

johnr

Posted
Posted
Hey guys,

has any one had any experience with rusty v35 exhausts?

I'm assuming its a common problem..

If not.. should I be worried?

If any one has replaced their exhaust, (with just say stainless steel) how much did it set them back?

Thanks!

Regards

SC

johnr Enthusiast

johnr

Posted
Posted

Hi,

I replaced my original exhaust a couple of months ago with a cat back Stillen stainless for $1100 but it was on special at the time. Freight cost $376!!!! The original exhaust was in excellent condition with no corrosion.

Regards

John

Garage Menace Collaborator

Garage Menace

Posted
Posted (edited)
Hi,

I replaced my original exhaust a couple of months ago with a cat back Stillen stainless for $1100 but it was on special at the time. Freight cost $376!!!! The original exhaust was in excellent condition with no corrosion.

Regards

John

Thread starter,

Sorry to jack your thread, but JohnR, was that freight from the US? If so, can you please PM me with company details etc as I'm trying to get an zorst from the states at the moment myself but freight has so-far been prohibitively expensive...

Also, does anyone with actual knowledge know whether there is ANY difference between the G35 and V35 when it comes to the exhaust so I don't import a useless exhaust from the US of A?

Cheers.

Edited by Garage Menace
NISMO Grand Master

NISMO

Posted
Posted
Thread starter,

Sorry to jack your thread, but JohnR, was that freight from the US? If so, can you please PM me with company details etc as I'm trying to get an zorst from the states at the moment myself but freight has so-far been prohibitively expensive...

Also, does anyone with actual knowledge know whether there is ANY difference between the G35 and V35 when it comes to the exhaust so I don't import a useless exhaust from the US of A?

Cheers.

The only thing to worry about, is that some US exhausts will not fit Coupes which came out with rear active steering. Exhausts such as the HKS Hi Power for example.

How tell if you've got rear active steering? NFI

  • 8 months later...
dannyw Community Regular

dannyw

Posted
Posted

sorry to bring this up from dead.

I dont seem to be able to find any catback exhaust from australia, which makes me wanna buy from the US now..

Actually was gonna the HKS Hi power, until reading NISMO's post about the rear active steering..

So, what else will fit? Fujitsubo? Borla? APS?

Anyone knows or owns one of those mentioned?

dannyw Community Regular

dannyw

Posted
Posted

how sure r u, G33K? i really like the hi power, but if it arrives and CANT be put on, i think i gonna cry.. and there is no way to sell it either..

i tried checking hks in japan, somehow the website doesnt show HIPOWER.. only legamax?

g33k Community Regular

g33k

Posted
Posted
how sure r u, G33K? i really like the hi power, but if it arrives and CANT be put on, i think i gonna cry.. and there is no way to sell it either..

Only as sure as the information my Mechanic gave me, www.tunehouse.com.au - give em a call and ask for a quote...

Tell them (Tim GE.33.EK) sent you :blink:

V35DRIVER Enthusiast

V35DRIVER

Posted
Posted

by far the best guys in sydney to help you out with a 350Z/V35 exhaust is Hi tech Mufflers in darlinghurst.... these guys specialise in lambos, porsche's all high end work.... for about $1300 you get a top quality exhaust system..... one that has that euro sound... not a drowing sound that you get from most of the cheap china stuff....

ogz007 Rising Star

ogz007

Posted
Posted

Yeh i agree with V35driver, the owner or the specialist there is pretty much straight up wth you and what they have for you, the material and advise is genuine. you will get quality stuff for what you actually pay for. and with that, have you seen the owners ferrari? its gangsta....

ogz007 Rising Star

ogz007

Posted
Posted

Her ya go my friend. hehehe

http://www.hitechmufflers.com.au/product/i...0Z&b=nissan

they do Cat back exhaust also.

a little different with the V35 from 350z, a little expansion needs to be done (piping) since our cars are a little longer.

we talked about the middle piping before on this thread.

http://www.skylinesaustralia.com/forums/Un...l&hl=Y+pipe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...