Jump to content
SAU Community

Recommended Posts

Yer car is good quality 176xxx kms on the clock but only 50,000kms on the motor

94 so series 1

Extractors, Exedy clutch few basic mods relatively quick car

Good for P plater

All good selling points

But im more interested in an average price

Ive seen some selling for $6000 and others selling for $15000 so it makes it hard to say the actual value

Are non-turbos worth more than turbos now?

Edited by homedog56
Link to comment
https://www.sau.com.au/forums/topic/225211-value/#findComment-3966063
Share on other sites

Yeah, Series II's go for about 13 - 16K, Series I's unfortunately go for about 7 - 12K max.

I was looking into getting a R33 before, thats why i got a fresh idea of the prices, but then stumbled on the R34.

I'd pay 9 - 11k Max for your ride, truly because as Shane said, the KM's are a turn off.

But good luck with the sale anyways if you go ahead with it.

MRXTCZ

Link to comment
https://www.sau.com.au/forums/topic/225211-value/#findComment-3966840
Share on other sites

i payed 11.5 for mine a few weeks back (my new 1)

its a 95 series 1.5 with zorst rims and a kick ass stereo already on it (cost the guy 4500 for it installed got receipts) and it is in really mint condition the paintwork and tint and all. 140,000 on clock.

hope this helps.

Link to comment
https://www.sau.com.au/forums/topic/225211-value/#findComment-3968275
Share on other sites

I picked mine up at Christmas for $8500

White 1993 R33 Series 1 GTS with factory sunroof. 104,000km on the clock, no mods beyond 17" rims, pod and exhaust.

Add on an extra $1000 for new head unit (was stock Jap one, with Japanese frequencies and a cassette player), alarm, immobilizer and rego.

However, my mechanic looked it over and said it was worth at least $10,000. I just got lucky.

Link to comment
https://www.sau.com.au/forums/topic/225211-value/#findComment-3970784
Share on other sites

What about mine?

96 Series 2, 65,000km, silver, no mods, sideskirts, genuine gtr spoiler and 17's?

Because I'm thinking of selling mine too

I'd be skeptical of your k's. I was told the clock on almost all imports is wound back somewhere between here and Japan, and numbers that low tell me that its almost a guarantee.

I remember looking at a GTS4 R33 that claimed it had 60,000kms on it. Just looking at the interior alone it looked like it had done 300,000. When looking at cars now I don't tend to worry so much about the k's, and just look at how clean the interior and engine bay is. I don't know enough to look beyond that even if I wanted to anyway.

Link to comment
https://www.sau.com.au/forums/topic/225211-value/#findComment-3970809
Share on other sites

I'd be skeptical of your k's. I was told the clock on almost all imports is wound back somewhere between here and Japan, and numbers that low tell me that its almost a guarantee.

I remember looking at a GTS4 R33 that claimed it had 60,000kms on it. Just looking at the interior alone it looked like it had done 300,000. When looking at cars now I don't tend to worry so much about the k's, and just look at how clean the interior and engine bay is. I don't know enough to look beyond that even if I wanted to anyway.

Frankly that comment just goes to show how ignorant you are about cars. as long as you have the import papers showing the km's on it, you should be pretty right. the average australian does about 15k a year, and it depends if its a daily or just a weekend'er.

in Japan when the cars get serviced the km's get entered into a DB, and when the car gets dereged to get exported they compare whats on the car with the DB to make sure they match up and if it doesnt look right they mark it on the papers.

Importing your self you shouldnt have too much worry, but buying from an import dealer, you should always ask for the import papers, and if they arent willing to show them to you, dont buy the car.

Edited by Grunta
Link to comment
https://www.sau.com.au/forums/topic/225211-value/#findComment-3971023
Share on other sites

I'd be skeptical of your k's. I was told the clock on almost all imports is wound back somewhere between here and Japan, and numbers that low tell me that its almost a guarantee.

I remember looking at a GTS4 R33 that claimed it had 60,000kms on it. Just looking at the interior alone it looked like it had done 300,000. When looking at cars now I don't tend to worry so much about the k's, and just look at how clean the interior and engine bay is. I don't know enough to look beyond that even if I wanted to anyway.

Oh, forgot to mention..I have all the service records when the car was brand new in Japan to it leaving the docks of Japan with 59,000km's on the clock. All the service records has the dates on it from Nissan, so I'd think it is pretty genuine....

Anyway, back to my question, how much is it worth?

Link to comment
https://www.sau.com.au/forums/topic/225211-value/#findComment-3971045
Share on other sites

Oh, forgot to mention..I have all the service records when the car was brand new in Japan to it leaving the docks of Japan with 59,000km's on the clock. All the service records has the dates on it from Nissan, so I'd think it is pretty genuine....

Anyway, back to my question, how much is it worth?

I'd personally say (this is just my guess - I have little experience to back it up) at least $14,000, if not more. Late model and low k's all help a lot. The colour and wing tickle my personal fancy as well.

Link to comment
https://www.sau.com.au/forums/topic/225211-value/#findComment-3971188
Share on other sites

I'd personally say (this is just my guess - I have little experience to back it up) at least $14,000, if not more. Late model and low k's all help a lot. The colour and wing tickle my personal fancy as well.

It's so weird how everyone tells me the price of an NA skyline has gone up, due to the new P plate law.

But is that actually true? has it actually gone up in value?

Link to comment
https://www.sau.com.au/forums/topic/225211-value/#findComment-3971218
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...