Jump to content
SAU Community

R32 Gtr Nissan Part Number


Recommended Posts

Hey guys, I've been searching for a while for certain part numbers and I found a website with heaps of Nissan part numbers for BNR32's.

I couldn't find the thread with part numbers and I think these are worth sharing. Here they are:

Timing belt (OEM) 13028-20P25

timing belt tension spring 13072-58S10

Rocker cover gasket 13270-58S01

Rocker gasket 13270-58S11

Engine cover finisher 13290-AA300

Exhaust manifold gasket 14036-05U00

Water hose 14055-05U11

Bracket 14076-05U01

Water tube 14498-05U14

Water tube 14498-05U15

Water tube 14498-05U16

Water tube RTN (turbo) 14498-05U17

Water tube 14498-05U18

Water tube 14499-05U16

N1 oil pump 15010-24U01

washer union B 15189-13C00

Eye bolt (water) 15191-05U11

Fuel filter 16400-53J10

Eye bolt (water) 16432-17F00

Water pump (N1) 21010-24U27

Water pump (oem) 21010-58S25

Fan pully 21051-58S00

Fan clutch 21060-55S01

Clutch fan 21082-05U00

Thermostat 76.5 21200-42L06

Water hose INLE 21307-05U02

Water hose (outl) 21307-05U04

Water bracket 21311-05U15

Water hose (top) 21501-05U00

Water hose (lower) 21503-72L00

Powertransistor ignition 22020-05U00

Air flow meter 22680-05U00

02 sensor 22690-05U21

02 sensor 22690-05U22

Alternator Assy (rebuild) 23100-86L12

Oil pressure sensor 25070-30P01

Power steering pump 49110-05U00

Condenser Assy 503706-0887

Retainer 52575-12010

Compressor belt A1950-30R12

Fan belt 920 A1950-59S01

Fan belt 950 A1950-59S02

Timing belt (pitwork) AY440-NS014

Turbo gasket D7212-50Y00

Brake rotor (GTR F) 40206-05U02

Brake rotor (GTR R) 43206-05U02

R33 Brake master cyclinder 46010-24U20

Tie rod (front) 48520-33P26

Upper camber arm (fr) 54524-86L00

Upper camber arm (fl) 54525-86L00

Rear tie rod (hicas) 55114-39F00

Rear tie rod (hicas) 55114-39F10

Ball join (rear tie rod) 55154-30P00

Front caliper over haul (gtr) AY600-NS047

Clutch cover 30210-05U01

BRG C/Release 30502-21000

Clutch bearing 30502-69F10

Piston kit C/L 30611-05U25

Clutch slave cyclinder (gtr) 30620-21U01

K cup clutch 30622-16E25

Rear diff flange 38220-12U00

Rear diff flange 38220-12U01

Drive shaft FR Outer boots 39241-05U85

Drive shaft FL Outer boots 39241-05U86

Drive shaft repair kit 39241-17V87

Front Right Inner Drive Shaft Boot 39741-05U25

Front Left Inner Drive Shaft Boot 39741-05U26

Drive shaft boot R inner repair kit 39741-17V86

Hub assy W 40202-05U00

Wheel bearing FR 40210-05U00

Hub snap ring 40214-05U00

Hub seal (front) 40232-33P00

Front hub seal 40232-33P55

Rear hub 43202-AA300

Wheel bearing seal (right) 43252-40P00

Piston kit M/C 46011-40P25

Clutch disk C0100-05U10

License plate light (right) 26544-04U10

License plate light (left) 26549-04U10

Bumper bracket (left) 62220-05U00

Bumper bracket (right) 62221-05U00

Hood lock stay 62550-08U31

hood male assy 65601-05U00

GTR emblem 84896-05U11

Corner light (left) B6120-05U00

Corner light (right) B6125-05U00

Ventilator Assy (center) 68750-01U00

Ventilator Assy (left) 68761-01U00

Rear panel finisher 76934-04U00

Window rubber seal 80834-04U00

Window rubber seal 80835-04U00

GTR key key00-00185

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Google tells me that's a Japanese Rat Snake... 2m long? Man I think Australia has traumatised me to think all snakes are dangerous unless they're pythons. Also... "16 years later..." is that a record on SAU @PranK?
    • Yep, I really miss mine. I dont, however, miss it's understeer. Hard to find a genuine 'Sport' model these days. That sounds awesome! Good fun and great result!  I'd love to do a 1/4 in mine now that its reasonably healthy with the tune. I last did a run in my white GTR, I think it was a 12.3 and I can't remember the mph and I think the little E90 might be quicker.
    • FWIW, I made 372kW on a Mainline dyno, with a stock motor (bar head studs & usual bolt ons) on E85 (pretty timid timing in the mid range) and it blew up after a year of track use. Probably got like 5~6 Wakefield track days and 1x skid pan somewhere in between.
    • Plus, if you want to shoot for over 300rwkW, the Z32 won't really cut it and retaining the PowerFC is getting to be a poor choice. You're going to be much happier with management that can actually see what's going on and have a hope of stopping it from going bad when something breaks (think oil pump). So, the $$ situation is probably different to what you think it is.
    • 350-400kw will not keep that basically stock motor basically stock very long, especially for track only use. It will decide to need a rebuild pretty quickly. I'd go smaller, and not cheap out with a Pulsar item based on older tech. Get a G25 550/660. Just better in every way. Don't think about changing a turbo until AFTER you change your injectors (S15 injectors x6? What CC are those?) and coils/fuel pump. They won't keep up with any aftermarket turbo.
×
×
  • Create New...