Jump to content
SAU Community

Recommended Posts

Nice clean work there, mate - looks good. Personally I wouldn't mount both the mid and tweeter in the kickpanel. Maybe do the mid there and find a place for the tweeter where there's still a clear path for the sound to reach the ears of the people in the car. High frequencies are very directional, and you'll lose them altogether if they're down by your feet. I put mine up behind the mounts for the wing mirrors which works fine. Ideally they should be closer to the main driver, but it was easier this way.

I've never seen that door/seat trim in a 32 before? Is that an NA model or something? EDIT: Ah, it's a 4 door by the looks of it?

Edited by HuH
  • 4 weeks later...

Hasn't anyone put speakers in their r32 kickpanels before?

I cut the middle out of my kickpanels and mounted the speakers in mdf rings that were held in place with metal straps.

post-13288-1216560238_thumb.jpg

I listened to them like this and tried different angles by adjusting the straps.

Once I was happy with the sound I made fibreglass backings and stretched fabric over them before coating them in resin and laying fg matting behind them.

post-13288-1216561214_thumb.jpg

After a bit of sanding they are ready to cover in vinyl.

post-13288-1216560441_thumb.jpg

Due to the complicated contours the vinyl will have to be vacuum formed so I've sent them away to be done.

I'll post more pics when they're finished.

Awesome job.. but the problem with having speakers so low and fr away in the footwell is that it bring the "Stage" of the music very low.

I used a single 3 inch tweeter at the base of the A pillar and it really opens the sound up and brings the tage almost head level..

I was hugely surprised.

Just a thought..

Awesome job.. but the problem with having speakers so low and fr away in the footwell is that it bring the "Stage" of the music very low.

I used a single 3 inch tweeter at the base of the A pillar and it really opens the sound up and brings the tage almost head level..

I was hugely surprised.

Just a thought..

It's much easier to get stage height than it is to achieve a solid centre image in a car.

The main reason for placing speakers in the kickpanels is to get them as far away as possible so that the difference in the distance between the left and the right speaker and the listener is as small as possible.

There can be issues with stage height but careful postioning and angling of the speakers and tuning with an equaliser can help overcome this.

I spent time listening to this setup before building it in fibreglass and the stage is dash top height at low volume but rises above that as the volume increases.

thats brilliant man, great job, very good idea with the metal bar too, i would even suggest doing the same for the passenger, there is nothing worse than having a passenger come in and kick the crap out of your nice new setup, and it looks kinda stylish too.

I agree with the placement of the tweeters that they should be up higher, i think that you can go wrong putting them on the panel opposite the door mirrors, considering its a common place its probably because it works well.

But anyhow nice work, look forward to seeing the tweeters in

thats brilliant man, great job, very good idea with the metal bar too, i would even suggest doing the same for the passenger, there is nothing worse than having a passenger come in and kick the crap out of your nice new setup, and it looks kinda stylish too.

I agree with the placement of the tweeters that they should be up higher, i think that you can go wrong putting them on the panel opposite the door mirrors, considering its a common place its probably because it works well.

But anyhow nice work, look forward to seeing the tweeters in

I thought about using a bar on the passenger's side but if I put it in the same position as the bar needs to be on the driver's side it wouldn't do much to protect the speakers anyway.

I'm not sure I follow your comments regarding tweeter placement, typo perhaps?

There is no perfect place for speakers in a car so placement will always be a compromise.

The bottom speaker is my tweeter.

I said why I chose this setup in a previous post.

The stage height is quite good, even excellent at higher volume.

Our ears are easily tricked by careful alignment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...