Jump to content
SAU Community

Recommended Posts

Hi all,

I've started to have a little bit of an issue lately with the colder mornings when driving the R33 GTR. I'm not sure if it is directly related to the colder weather or if it's something else, so here goes - see if you can help me as I'm not sure haha. Could be a lot of things:

When I start her up in the mornings and also before driving home from work I make sure I let the car idle for at least minute so that it warms a little, but mainly to get oil everywhere. But, when I drive off it feels quit sluggish and surges ever so slightly if you give a little bit of throttle. Mind you, this is not enough throttle to make positive figures on the boost gauge - I never flog a cold car (a mate has described the engine wear to me first hand!)

But here's the catch guys....this is where it becomes interesting:

Every morning, at exactly the same mark on the temperature gauge (about 1 fifth up the gauge so still quite cold) you'll notice the car become normal in a split second. It drives and accelerate smoothly as though there never was a problem. I swear that the other day I even heard a very faint click at exactly the point where the car stopped it's issues. All of a sudden there's a change in acceleration - a tiny jolt and everything's back to normal.

It's hard to describe, but it feels like you give throttle but there's not much response in acceleration....feels very spongie.... I'm curious about it as it looks like it may be sensor / temperature related.

Could the cold weather make something stick? Is there something wrong with the *choke* fuel mixtures / AAC valves?

Please note that when the engine is warm to hot (above the 1 fifth mark I mentioned) it doesn't have any of these issues. Also, the car is completely stock with stock ECU.

Thanks for your help!

Tom

PS - temperature when this happens is around 5 to 10 degrees in the morning, and around 15 to 20 degrees in the afternoon around 5pm when I head home. Hope this helps...

Link to comment
https://www.sau.com.au/forums/topic/225604-r33-gtr-driving-with-cold-engine/
Share on other sites

Mike, I see. Well, I've only heard the click once so far. I'm convinced that it's the cold weather causing something to stick. A switch, a solenoid....a sensor....something somewhere is being affected my the cold and as soon as it reaches a certain temperature it is fixed.

You know when you're leaning over the engine and you slightly open up the throttle with your hand, right? You hear a little click that I think comes from the crank angle sensor...and then rev's build up. I swear I heard that click the other morning.

By the way, I'm not 100% sure if it's the crank angle sensor that makes the click...it comes from the general area though.

Dan, if it has to do with the timing or the TPS....how would the cold temp of the engine influence this? Does timing change when the engine is cold? The thottle is not adjusted for cold start is it?....it's only the additional valves under intake plenum that let more air in to build cold start rpm's????

Mike, does your GTR change back to normal at exactly the same temp as mine? Mine is about 1/5 on the temp gauge....so, about 2mm above the lowest line on the temp gauge etc

mate mine does the same thing i think i was told that it has got something to do with a cold start tune, which is normal so i have been told to avoid flogging its mum when cold and temps reach normal driving temps

Ah OK well that's all good then. Just making sure nothing is wrong with it - obviously it kicks in when it reaches certain temps when winter comes on like now.

Yeh it's like clockwork...it always goes back to normal at exactly the same point on the gauge so it must be exactly what you're saying it is.

Thanks for the help guys!

Tom

Its the water temerature sensor. The one with only one plug and its closest to the head. Mine did the exact same thing. Try cleaning the connections to the one you already have and you will notice a change. The best thing to do is to replace it. If you do make sure you get the genuine one from Nissan as the ones from Bursons dont work.

Changing the sensor fixes this problem instantly.

Steven, ok sweet...I will go and inspect the sensor connectors and see how it goes when I start it up. I never thought of doing that - but then, I never had that problem either ;-)

Because surely, Nissan wouldn't put such a strange tune on the car lol that feels so strange to drive ;-)

Ok Steve, I went out and cleaned it just then...it had traces of green/blue oxidation on it so I cleaned it all off with RP7 (for want of a better contact cleaner haha - I should get one of them and then inspect all electrical connections!)

See how she goes a bit later

Ok Steve, I went out and cleaned it just then...it had traces of green/blue oxidation on it so I cleaned it all off with RP7 (for want of a better contact cleaner haha - I should get one of them and then inspect all electrical connections!)

See how she goes a bit later

hi my gtr does the same until like it just gets warm. Where abouts on the head is the water temp sensor?

At the top of the block on the left side (when standing infront) and it's the ones with the single lead. It is also closest to the block and it's hidden behind a larger sensor.

It is also hidden under the black hose the encases the injector leads.

Our GTR's came from a crap, wet and cold climate from Japan so it'd be a good idea to do all the electrical component connections and bolted earthing connections. I noticed that they all could do with a clean so that's what I'll do guys. Let ya know how it goes I guess ;-)

It's normal for a GTR. My GTR did the same thing on the standard ECU. It's the Closed Loop/Open Loop thing, protecting the engine.

When you change the ecu it doesn't happen anymore. But it's not a bad thing anyway.

Ferni...now that's what I was suspicious about but didnt have the balls to ask about.

The RB26 is such a great engine....why wouldn't they have installed a system that stopped utter noobs from powering out of their driveways on a cold engine??? Well that's all good then bro....I was just wondering as my GTST never did that ;-)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I sense an out of control build thread coming up lololol. That 450kW goal will end up being 600 to 700kW LOL.
    • Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
×
×
  • Create New...