Jump to content
SAU Community

Recommended Posts

I'm looking for an R33 GTS-T and I'm very, very close to signing up with Geoff at Prestige Motorsport to privately import a vehicle like so many of you already have. However, I was looking through Geoff's list of past/sold vehicles tonight, when I came across this. It's a 1994 Nissan Skyline GTS-T.

http://www.prestigemotorsport.com.au/au/st...asp?StockID=120

Condition notes: Excellent condition throughout. No stereo. $16,800.

594.jpg

596.jpg

598.jpg

The car looks nice. The report is positive. I very well could have purchased this vehicle. However, I have also been looking at cars locally (in South Australia) and this car reminded me of a 1993 R33 GTS-T I looked at and test drove a few weeks ago. In fact, it's the very same car.

The problem being that the condition of this 1993 (not 1994 as stated) GTS-T was not even close to 'excellent throughout'. In fact, the car was absolutely farked. It stalled for no reason (several times) and attached are a few pictures of the car's actual condition.

http://endept.com/fckedr33

So, what happened? Did somebody buy this vehicle, absolutely thrash it for three months (without clocking any KMs) and then try to sell it at a profit? Or was the vehicle description provided by Prestige Motorsport a little off?

Has anybody had an experience similar to this? I have once again been put off importing. Somebody reassure me. :O

Oh, and there was a silver sticker under the hood with Japanese writing all over it and the number 100,000. Does this mean the car has had a 100,000KM service, or does it mean the car is due for a service at 100,000KMs, or does it mean something else entirely?

Link to comment
https://www.sau.com.au/forums/topic/22574-prestige-motorsport-another-question/
Share on other sites

id say that the car was probably bought by someone then thrashed or maybe the car yard thrashed it or something like that

what geoff says about the cars is usually correct i know heaps of people who have imported and not one has complained about the cars condition - goeff can pick from thousands of cars so really he is gonna tell you the truth about each one he's not running some dodgy caryard, Prestige have no reason to make the descriptions a little off

just my opinion

dude...

no one will never be sure unless you ask geoff himself. everyones answers are purely guesses. the thing you have to look at is most people are 100% satisfied with prestiges services and if this was a re occuring problem im sure it would be well known by now.

IMO the damage looks as though it was scraped really good when the car was rolled onto and off the boat.

Notice in the original pic, the car was part of stock at some kind of japanese dealership? IMO dealerships world wide are scum bags. I think they also had something to do with the bullshit 'faultless' comment. How Geoffs contacts in japan didnt notice it is beyond me.

IMO it is best to buy off auctions and skip cars Geoff has in stock. In auctions you get a detailed inspection report and anaylis of the car. As well as a vareity of photos.. (interior, exterior..)

I would say it was damamged while being put on and taken off the boat. Plus a little thrashing.

If you think that a few nicks and scratches makes it Absolutely farked as you say , then I would strongly suggest that you don't import one.

Your stds are going to be way too high and I would buy local so you can see and try before buying.

Cheers

Ken

good point - your gonna find it hard if you want something with no scratches at all also that body kit is extremely close to the ground in the photo, id say it would have scraped heaps of things on/off the boat, on the way to the dealer, test drives etc. but if you do import through prestige they are always more than willing to get more photos of the car you wish to import as they did with mine:D

Yes, you raise a valid point. The car looks alright in the Prestige pictures. However, it wasn't only damage to the kit. The entire car badly, badly needed respraying. There were countless scratches on every panel, none of which were mentioned on the Prestige web-site. Is this type of damage common in transit? If it is, I think gtrken is right in saying importing isn't for me.

Edit: I have e-mailed Geoff too asking why the car was listed as being a 1994 model.

Lastly, what would cause the car to stall for no reason? Major engine problem? Minor engine problem? I wouldn't have a clue.

Originally posted by P1E

Oh, and there was a silver sticker under the hood with Japanese writing all over it and the number 100,000. Does this mean the car has had a 100,000KM service, or does it mean the car is due for a service at 100,000KMs, or does it mean something else entirely?

If it was down the front, I think this means to change the timing belt at 100,000kms.

anyway...as akeenan said, you can really only get the answers from Prestige. It all sounds a bit weird but who really knows what the proper story is? He has nothing to gain from giving false descriptions...and everything to lose...so I doubt there would have been any deliberate deception.

The scratches could have been caused to the car after it got here, from whoever bought it. Who knows how it's been treated in those 3 months? As for the stalling problem... this is very common...see the performance section.

All I can say, P1E...is don't be put off importing!! If you decide it's not for you, then fair enough...but find out the full story before you decide anything :)

Geoff has done the same to someone I know with their R34. According to him the condition was "Excellent Throughout" however he failed to mention that a) the car had a crappy respray, was chipping off in places and was scratched to the shithouse

B) also failed to mention minor accident history.

however Geoff refunded his broker fee after argument.....

I had a dealer here in bris offering me a 32. I found out thru the photos that he was going thru HB Tokyo. The dealer told me the car was in VGC, no accident history. I then emailed HB Toyko to see what they had to offer and they sent out photos of the car, and i asked what sort of condition it was in. HB Tokyo replied with a few scratches, accident repair history to the front quarter.

I then didnt go thru with the dealer...

Cant fault Geoff in regards to my current car, it is quite clean. He can generally provide the auction report of the car as well. He has nothing to hide and as his ad in HPI states 30% of business is from previous customers.

He has so many cars to choose from that he wouldnt bother with a car that would see problems. Thats just my experiences with him anyway, he is alot better than most people in the import market.

A lot of Skylines stall for no apparent reason, usually because of an aftermarket bov (but not always). Check this thread in the forced induction forum.

Stalling is usually no way to tell if a Skyline engine is shagged, you have to use the normal methods like loss of compression or burning oil or strange noises.

For all those who are interested, below is Geoff's reply.

In response to your post, we did not sell that vehicle to any customers so there is no way that we can confirm that it is the same vehicle for a start.  Also, there is no way of knowing what happened in transit or what happened to the car once it arrived.  For all we know, it's been stolen and recovered since it's been in Australia, or had parts and panels swapped with another car.  Only the owner can answer your questions, however I doubt they will.  The car was not bought through a car yard, it was sourced by a reliable supplier from auction who would not have bought a car in the condition you have described.  Pictures were taken in a car yard as this is where the stock vehicles are stored by this supplier.

 

Re: the R34 comment, that is like many posts incorrect in terms of a number of details.  We did supply one R34 GT-T that turned out to have poor paintwork.  I inspected it myself at auction when I was in Japan.  There was rain all over the car and the auction sheet listed the car as a respray -- both facts were told to the customer.  However, the paint looked fine and covered in rain there was no way of getting a better opinion.  The price achieved at auction was about $2,000 to $3,000 less than the average prices at that time.  The car was put in a container for transport, but there were a lot of scratches that occurred in transit -- the only conclusion we could come to was that something else was packed in the container which shouldn't have been.  The insurance covered some of the repainting.  As a result we do not recommend containers any more.  We did not refund our service fee as the issues were beyond our control.

 

The process is not perfect, so if you have any doubts about importing, don't.

 

Geoff

My 97 Spec II in mint condition from a private importer in AUS had a massive stall problem after a month of owning it. I had nissan in melbourne have a look at it and they couldnt find what was wrong but were able to replicate the stalling. I said well its ****ed, fix it. They then reset everything they could changed all disposable parts (spark plugs n shit) and then it was sweet. They said they found nothing wrong and it seems to run fine. Since then its been awesome.

The stalling problem was terrrible. COuld sit at the lights without it stlaling. It had no mods either btw. fully stock. Even stock air box

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
    • Well this shows me the fuel pump relay is inside the base of the drivers A Pillar, and goes into the main power wire, and it connects to the ignition. The alarm is.... in the base of the drivers A Pillar. The issue is that I'm not getting 12v to the pump at ignition which tells me that relay isn't being triggered. AVS told me the immobiliser should be open until the ignition is active. So once ignition is active, the immobiliser relay should be telling that fuel pump relay to close which completes the circuit. But I'm not getting voltage at the relay in the rear triggered by the ECU, which leaves me back at the same assumption that that relay was never connected into the immobiliser. This is what I'm trying to verify, that my assumption is the most likely scenario and I'll go back to the alarm tech yet again that he needs to fix his work.      Here is the alarms wiring diagram, so my assumption is IM3A, IM3B, or both, aren't connected or improper. But this is all sealed up, with black wiring, and loomed  
×
×
  • Create New...