Jump to content
SAU Community

Recommended Posts

farken awesome mate! well done. :D

refresh my memory, what turbos are you running? you must be very happy with the results. :(

edit: 315rwkw on just 10psi is awesome, and it looks pretty responsive too. i'm guessing 2530s or similar?

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

Cheers guys.

Yep Richard, 2530's I bought off Slide a while back. I'm stoked it's going so well. All the little things + $$$ add up to get that figure lol. 260 poncams with around 2deg advance on the intake, 0 on exhaust.

Responsive for a 2.6l lol. It's very driveable in traffic too. Can't wait to finish tune on higher boost setting though.:)

Ha ha, I ain't complaining lol. It drives like a bigger engine at the moment. One of my friends saw the graph and said it was an NA lol. In first gear I'd accelerate in a straight line and all through first gear you could hear tyres scrabbling for grip! I wonder what to expect when I run it in and go from there. WSID will be on the cards with some mickey t's to test it out.

  • 11 months later...

post-12712-1253943521_thumb.jpg

From when I got it tuned a while back, they didn't finish it due to the metal cat converter shitting itself, and partially blocking the exhaust. Has a couple of othe lines from other cars lol.

Done over 17,000k now and running well. Blew my rebuilt gbox a few months back, so put in another stocker, number 4 now I think.

Only things I'd like to fix up is:

Top ring gap, currently 21thou want 14 thou.

Sump vent, plumb one in to let oil in head drain back down, when on track days at high revs it half fills the catch can with oil.

Sump baffle, trap door and bigger sump....

Other than that it's good. Revs to 9k but I don't have to as peak power is around 7400.

Gets oil and filter change every 3000k. Track days, it gets dumped asap.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • About $4k brand new, available from vendors in Oz, or via an importer from Japan. Although that is for an R34 box, so you also need to buy the push clutch front plate (brand new from Nissan) and swap that over, and drill the bellhousing for a push clutch slave cylinder.
    • Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
×
×
  • Create New...