Jump to content
SAU Community

Turbo Exhaust Exchange.

Daboss

By Daboss,
in Engines & Forced Induction

 Share

Recommended Posts

Daboss Experienced

Daboss

Posted
Posted

Hey forum how is everyone doing? I am looking at upgrading my turbo and I am not to picky about horsepower and all tht, just want a good upgrade. Now my question is, Which garrett turbo can I use with the turbine exhaust of my stock turbo? I don't want to have to buy a new dump pipe as the one I have now I want to keep and I am a bit tight on money, but none of the gt25 or gt28's of the garrett turbos even come t3 flanged so my question to you is which one will fit the stock exhaust turbine housing and produce the most rwkw?

Link to comment
https://www.sau.com.au/forums/topic/226244-turbo-exhaust-exchange/
Share on other sites
Daboss Experienced

Daboss

Posted
  • Author
Posted

Yea but i am not in Australia and to be real the turbo knowledge here is limited and nobody highflows turbos here, thats why i wanted to know what garrett upgrade would basically take the stock turbine housing. Just a simple remove and reattach.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
Yea but i am not in Australia and to be real the turbo knowledge here is limited and nobody highflows turbos here, thats why i wanted to know what garrett upgrade would basically take the stock turbine housing. Just a simple remove and reattach.

And? Ever brought parts from Japan? Same shit... Its called freight, and its not that expensive.

You want the best solution, its a hi-flow. Trying to butcher up a properly designed Garrett isnt going to work... and considering no-one hi-flows, then your never going to be able to get your stock housing onto a GTXX frame because it'll need machining either way and thats exactly the same process as hi-flowing. At least hi-flows have some information avaliable, butchering a designed Garrett is all luck and risk.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...