Jump to content
SAU Community

Help to install a system

JT

By JT,
in Car Audio & Electrical

 Share

Recommended Posts

JT Community Regular

JT

Posted
Posted

Hey all,

I have a 95 Skyline 2Dr. I am looking to install an amp, splits and 6 x 9 speakers for the rear. I have this stuff already b/c I took it out of my old car(written off). Anyway I want to put 6 x 9 in the rear, I have had look at the rear parcel shelf and there is not much room to play with. If I put spacers in, the speakers come close to the rear window? What thickness should I have for the spacer? Also for Splits at the front where did you install the tweeter? Anything I should know(tricks or problems)? I am going to install the amp next to the battery. This will be a tight fit. How have you all installed the amp and where? Any pics would be great of splits, amp and 6x9.

Hints would be great as well.

If i cant get the 6x9 in, I will put splits in.

Please help guys.

Link to comment
https://www.sau.com.au/forums/topic/22632-help-to-install-a-system/
Share on other sites
Craved Grand Master

Craved

Posted
Posted

I made a new parcel tray for my R33, just took out the current one, traced it onto 18mm MDF, cut this out and shaped the edges to fit in, then ran another layer around the speakers only! so efectively 36mm spacers!

I have then fibreglassed over the 2nd spacer to created smooth transition!! looks ok just have to put a material over it!!

hint with tweeters, just keep them close the woofer, haven't installed my splits in the front yet, but in my lancer had them sitting in the tray/pocket in the door, so they were hidden but still faced up for good sound! PLUS i didn't have to put a hole in the trim!!

hippy Grand Master

hippy

Posted
Posted

forget about 6x9's in the back ... spend big on splits on the front ... get a good sub ... thats all u really need ... unless u want a bit of rear fill ... then just buy something that fits and is cheap .. thats just my recommendation ... and u're going to also have a hard time findin speakers that fit the front as well ..

Mud Grand Master

Mud

Posted
Posted

Yep, I agree with hippy, forget the 6x9's, swap them or sell them and get a sub.

It'll be heaps less work, and sound way better.

If your amp wont fit next to the battery, screw a piece of MDF to the cover that goes across it. Then mount you r amp on it.

Looks pretty neat and is easy to get to. Also allows plenty of ventilation for cooling, (even though you should really mount them horizontally).

A pre fab sub box is not as flash as a full install, but does the job, and can be taken out to make more space.

JT Community Regular

JT

Posted
  • Author
Posted

I dont want to buy a sub and take up all my boot space.

Anyway I installed 6 X 9 speakers in the rear parcel quite easily and the parcel shelf still looks original. I just changed the carpet on the shelf.

To put 6X9's in you must get some 19mm mdf or chip board. Then you have to cut out a square a little bit bigger than the 6 X9 template. Then you put the wood on the shelf and see where else you have to cut the wooden spacer and screw it in. Once co,mpleted the original shelf must be carpeted because the 6X9 speakers sit on an angle. I think this was a good alternative if you dont want a sub and the shelf still looks original with vents.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...