Jump to content
SAU Community

Recommended Posts

Some of it is not bad.

eg.

Mobility Parking Permit holders are now allowed to stop for up to five minutes (previously two minutes) to pick up or set down passengers in a no parking zone. All other drivers can remain for two minutes only.

So this means that you are allowed to set down passengers at no parking zones for max 2 mins.

That's how I read it. Maybe it was already a rule but wasnt really written anywhere (AFAIK)

How annoying will it be taking off from a set of lights in a 80kph zone with a bunch of push bike riders

taking off from infront of you.

How long does it take to get to 80kph for your average bike rider on a flat surface?

Too damn F'ing long, thats the answer.

I think you were always allowed to stop in a no parking zone but they have just clarified what stopping means. 2 minutes or under.

Bob will not be happy to hear of this rubbish. He always rides on the tank of my bike. Loves it. Has done thousands of km on there.

When it comes to push bikes, China here we come. I am so sick of the bikes up there, now I have to experience the same headache back home too, that is just great. My two cents on this matter, push bikes should not be allowed on the road untill they start paying registration. Why should the rest of us be fined and lose points. Are this bike ridders so in a hurry that they need to be ahead of the rest of the vehicles, which are much faster than a bike, i might add and as if that is not bad enough we are going to sit there and watch some bike execute a very time consuming hook turn.

Ok, I feel better now, back to happy thoughts, life is too short to worry about this.

:P

^^^^^ Agreed!!!

If it doesn't have an engine they shouldn't be allowed..

It also states rollerblades and those little scooters aren't so why should bikes..

We pay to use the bloody road.. and too much at that so the last thing we should have to put up with is those riders taking up a whole bloody good lane!!!

They should be charged rego too if they want to use the roads..

What a load of shit.. They are just trying to make more money..

I say lets run everyone over!!! hahaha :P

+1 its like there just takin advantage of the power they have now. i mean a hook turn for bikes? might aswell make the roads like vic. "bicycle storage" areas what for? why cant they have there own lane? theres gonna be some good accidents

I find it so difficult why people cannot follow this simple rule, would save so many dickheads side swiping cars.

Keeping off a painted island

You can now only drive on a painted island for up to 50 metres if you are entering or leaving the road, or entering a turning lane that begins immediately after the painted island. You still must not drive on a section of painted road that is surrounded by double lines.

I also find it offensive that they make all the school zones double the cost, I dont see how it effects any children being run down if you park for over 2 minutes, sorry stop. Im all for the higher speeding fines, and all for 40km/h zones. Id appreciate more 40km/h flashing signs.

YOu were always allowed to stop in no parking zones - on the cyclist thing yeah they shit me too but on the other hand more people on push bikes = less people in cars = less traffic, pollution and parking for me, so why not I say.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
×
×
  • Create New...