Jump to content
SAU Community

Recommended Posts

250 rwkw R32 gts-t

RB25 gearbox

OS Gieken Triple plate clutch

Price is slightly negotiable for genuine buyers!

All the details can be found here: http://carsales.com.au/used-cars/private/N...NE&__Nne=20

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/226868-rb30-twin-cam-powered-r32-gts-t/
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
Awesome car but i think the price is a bit high. You can buy BNR32s for around the same price

I hear what you're saying but 32 GTR's that are around the same price as mine are usually have highish k's so you're risking a rebuild due to the dreaded big end knock they suffer from (my motor's only done 8000kms) and mine's extensively modified leaving the buyer nothing to do but enjoy it. I do respect what you're saying though.

I'm sure someone will see the value in this car.

Cheers!

hey dude when dose it come on boost and hit full boost

and wat else major did u have to modify for it to fit

Edited by blockasR32
hey dude when dose it come on boost and hit full boost

and wat else major did u have to modify for it to fit

15 psi by 3900rpm & 12 psi by 3500rpm.

all that was needed to make it fit was i lowered the engine mounts!

Cheers!

20 grand is a bit steep

i am about to do a 25/30 fo mine and it looks nearly the same but different

was there anything else that u had to do for this conversion

20 grand is a bit steep

i am about to do a 25/30 fo mine and it looks nearly the same but different

was there anything else that u had to do for this conversion

buy my motor and u dont have to do anything except drop it in!

and u want my motor, gear box and tailshaft and it will go straight in wat about the wiring loom and computer

i'll do a complete swap with cash my way, i'll take your motor, gearbox, tailshaft, loom and computer and cash.

In return you'll get my motor, gearbox, tailshaft, loom and power fc with h/c so that it will fit first time no worries!

Cheers!

wat power fc are u running and wat so different bout the wiring loom

running the rb20det ap engineering power fc.

just realised your loom would be identical to mine so it would be far easier leaving the loom in each of our cars!

Cheers!

na up in mackay qld

i am about to start building my own rb25/30 and i'm just trying to suss it all out when i do start u reckon u would be able to help me

na up in mackay qld

i am about to start building my own rb25/30 and i'm just trying to suss it all out when i do start u reckon u would be able to help me

do a search mate.

its all in the the r33 rb30 conversion thread and there's a pdf that cubes did!

good luck!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...