Jump to content
SAU Community

Recommended Posts

so i got my defect letter today and:

ride height too low - bah coilovers - not worried

suspension to retain 2/3 travel - 8/6 springs - should be fine

seatbelt retractors broken - have new seatbelts to put in anyway - not a worry

so far all good...

BUT

INDUCTION MODIFICATIONS to comply with standards

what the hell exactly does this mean?

car (rb25det) has:

hks bling bling obvious turbo & heatsheild

steel induction pipe

fmic

pod (in box with cai)

ebc & all other supporting mods

@ the time of inspection he was concerened with the steel pipe but the physical notice is a LOT more general...

any ideas on what i have to re-stockafy for vic roads (VIC roads)?

Link to comment
https://www.sau.com.au/forums/topic/228193-defect-notice/
Share on other sites

yeh I got this too, pretty easy fix... I think it is said somewhere that you can have either a pod OR a fmic... so in basic terms... you can only have one induction mod.... which in this case is obveously going to be the fmic, so just make the pod back to a standard skyline air intake and you'll be sweet...

I got similar shtuff to you... the bs was though, he said he cbf measuring the height of my ride... he just put it down... even when I told him it was fine and to measure it....

prix...

Adam :D

Link to comment
https://www.sau.com.au/forums/topic/228193-defect-notice/#findComment-4014939
Share on other sites

I got similar shtuff to you... the bs was though, he said he cbf measuring the height of my ride... he just put it down... even when I told him it was fine and to measure it....

prix...

I would have shoved him under the car, ruler in hand.....cbf is no excuse, he could get his arse fired for that. Essentially by writing that down he's given false evidence on a legal document.

Link to comment
https://www.sau.com.au/forums/topic/228193-defect-notice/#findComment-4015040
Share on other sites

I had to customise My original air box to fit back in....

I made it look like it was meant to be that way....hacksawed it up, then black electrical tape where is had cut and a quick spray of black paint :P

If you have the standard filter in it like mine did.... don't flog it, car feels like its chooking and will be jerky... or you could just buy a better panel filter... but I cbf wasting the money for a drive down to the mechanics.

I know of an awsum place in Dandenong that told me all was good except for my hid kit... instead of making me pay again and have to come back, they said that I could work on it there, offered me standard bulbs if I needed and said that aslong as they see it leave with standard bulbs then it is fine...they also didnt say anything about my bigger turbo or bleed valve :laugh:

Link to comment
https://www.sau.com.au/forums/topic/228193-defect-notice/#findComment-4015766
Share on other sites

instead of making me pay again and have to come back, they said that I could work on it there

i use to use a rwc guy that didnt fill out a rwc on the first check so if you needed longer to fix it you could, he would also only charge for one inspection, unfortunately he has retired.

Link to comment
https://www.sau.com.au/forums/topic/228193-defect-notice/#findComment-4015972
Share on other sites

Having a POD and a FMIC is NOT a defectable offense!! It is an EPA issue, all the police really should do is EPA you for having both. As long as your POD is well secured, they should not be able to defect you. In fact if you come to my workshop with both your POD and FMIC, providing the POD is properly secured it will not get picked on.. AND as long as your intercooler has been mounted without and modifications to the cars structure, as in cutting structural parts to fit cooler piping etc

It just might be worth trying to get in contact with the people who are in charge of or handle the RWC side in VICRoads. I only know this because my bosses have attended roadworthy workshop meetings and have spoke to people higher up in VICRoads, and they have all said if the police have a problem with it then contact them!!

But then again getting EPA'd sucks! But if the police cant find 3 defects you dont need to present VICRoads with a RWC!

Link to comment
https://www.sau.com.au/forums/topic/228193-defect-notice/#findComment-4016002
Share on other sites

if you come to my workshop with both your POD and FMIC, providing the POD is properly secured it will not get picked on.

where abouts is your work shop, with a comment like that im sure you will get more business in the near future.

Also there has been some spectulation lately that the hole for ic piping is only illegal on S2 R33's due to the air bags, do you agree with this?

But then again getting EPA'd sucks! But if the police cant find 3 defects you dont need to present VICRoads with a RWC!

So i guess it is best to come and see you for an rwc and not mention the epa loop hole.

Link to comment
https://www.sau.com.au/forums/topic/228193-defect-notice/#findComment-4016008
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...