Jump to content
SAU Community

Recommended Posts

The general idea with Illawarra and Alexander Drive is to avoid all together! Works for me. I just go around the long way, follow it to the end and get back onto Alexander Drive. Screw waiting at the lights, its a bit like going on a mini cruise by yourself :rofl:

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

The general idea with Illawarra and Alexander Drive is to avoid all together! Works for me. I just go around the long way, follow it to the end and get back onto Alexander Drive. Screw waiting at the lights, its a bit like going on a mini cruise by yourself :worship:

Maybe I'm just too tired, but..

What to the end where? Lol both ends intersect with Alexander.

Edit: And I think lights at that bit are long overdue, it was terrible before that.

Edited by s2k12

+1 for Nicholson Rd/Yale RAB and Leach/Tonkin intersection.

Also Ranford Rd near IGA (Canning Vale) so many ppl just run the intersection rather than giving way to people in the RAB.

My personal fav though is the dual lane RAB intersection Shenton Ave and Marmion. It works well in theory, but too many people just can't cope with dual lane RABs, so many accidents there!

Hutton St at the freeway entries/exits. Gets so busy sometimes, usually traffic gets banked up in one lane but not the other so people try turning across the road not being able to see if there is another car coming along in the other lane at a speed too fast for the conditions. Where do people get the idea that a green light means you are completely safe at an intersection and don't need to adjust your speed if there is shitloads of traffic banked up or even bother to check that an idiot isn't crossing when he shouldn't be?

Pretty sure the bike thing works on power too.. a mate had a 650cc dominator (road/trail) which is able to be used on a small bike license as it only had like 33kW.

Also, don't brake-check cops.. they'll do you for dangerous driving (another mate of mine got done for it).

I'm a good boy :down:

Not really an intersection, but there's a rather large pot hole on alexander drive which I hit today because the puddles were hiding it. Yay for almost ripping the tyre off.

Not a single intersection but any round abouts. . (the double lane ones)

Is it just me or does everyone on the outside lane ALWAYS cut into the inside lane and make you get really close to the roundabout?

I cant remember how many times this has happened to me and ive been forced up the curb on the inside of the roundabout. . happens just about every week. .

And like stinky rooster said, the roundabout on armadale rd. . Happens mostly there and the one further up in forrestdale (still on armadale rd)

STAY IN YOUR LANE!!!

Not a single intersection but any round abouts. . (the double lane ones)

Is it just me or does everyone on the outside lane ALWAYS cut into the inside lane and make you get really close to the roundabout?

I cant remember how many times this has happened to me and ive been forced up the curb on the inside of the roundabout. . happens just about every week. .

And like stinky rooster said, the roundabout on armadale rd. . Happens mostly there and the one further up in forrestdale (still on armadale rd)

STAY IN YOUR LANE!!!

I'll admit that I do this, but only if there isnt anyone in sight. Seriously, who is stupid enough to cut someone off? Thats just stupidity.

Also, its a 7 demerit point fine apparently, thats the other reason I only do it when no one is around ;)

  • 5 weeks later...

Gnangara rd and Beechboro rd at peak hr, AVOID LIKE THE PLAGUE!

I've had to hit the skids for a couple of noodles that turned infront of me while heading west on gnangara. And trying to get onto gnangara from beechboro is nearly impossible

I dont know about dangerous but my picks do require a little more vigilance.

Freeway overpass at Hutton st..clowns changing lanes in the turn, then is standard nonsense down to W.A.'s old shop

Walcott and Beaufort. Every yuppie for themselves

Mirrabooka and Reid. I don't know why but there is always evidence of carnage

Right turn exit off Kwinana to Canning...make up you minds ppl, are you going into the Raffles or not?

Leach from Northlake to the Freeway anytime after 3pm on a Friday...Indy 500 without the skillz.

And any place I ride my Triumph

Mirrabooka and Reid. I don't know why but there is always evidence of carnage

I still fail to see how that's dangerous, all the accidents there are because people skip the lights. Fault of the people, not the intersection.




  • Similar Content

  • Latest Posts

    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
    • Ha ha ha, so they stopped the bearings spinning on the one you want, but then decided the crank hub should slip instead 😛   Stick to RB, at least you can work on it yourself. And now it doesn't smell of vapour   Also I still believe there's a chance your new flap doesn't "pop", as even though the engine might breath hard, it has a direct path with no restriction to the inlet, which when on boost should pull a bit of suction for you. If you do get pressure in the catch can id be very intrigued. Time to put a boost gauge on it, and a session at the track, then solid cover your vent and do another session
    • Oh nah, S55 doesn't eat bearings, just the crank hub slips lol.
    • When’s the tow ball on the 33 coming? 🙃
    • I welcome any basic question that can help haha. Yes it has 2 unis but the driveshaft is a one piece and the unis are welded without a slip yoke at each end.   What's funny is anytime I've ever had wheel vibrations it's always been in the front so I automatically assume it will lead to steering wheel shake and not chassis vibration. With that being said, I never considered looking at my rear wheel balance... I have doubts though as this wasn't an issue before I pulled the motor and trans but is still very much worth a look. I'll do that tonight after work. Thanks. 
×
×
  • Create New...