Jump to content
SAU Community

Recommended Posts

The general idea with Illawarra and Alexander Drive is to avoid all together! Works for me. I just go around the long way, follow it to the end and get back onto Alexander Drive. Screw waiting at the lights, its a bit like going on a mini cruise by yourself :rofl:

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

The general idea with Illawarra and Alexander Drive is to avoid all together! Works for me. I just go around the long way, follow it to the end and get back onto Alexander Drive. Screw waiting at the lights, its a bit like going on a mini cruise by yourself :worship:

Maybe I'm just too tired, but..

What to the end where? Lol both ends intersect with Alexander.

Edit: And I think lights at that bit are long overdue, it was terrible before that.

Edited by s2k12

+1 for Nicholson Rd/Yale RAB and Leach/Tonkin intersection.

Also Ranford Rd near IGA (Canning Vale) so many ppl just run the intersection rather than giving way to people in the RAB.

My personal fav though is the dual lane RAB intersection Shenton Ave and Marmion. It works well in theory, but too many people just can't cope with dual lane RABs, so many accidents there!

Hutton St at the freeway entries/exits. Gets so busy sometimes, usually traffic gets banked up in one lane but not the other so people try turning across the road not being able to see if there is another car coming along in the other lane at a speed too fast for the conditions. Where do people get the idea that a green light means you are completely safe at an intersection and don't need to adjust your speed if there is shitloads of traffic banked up or even bother to check that an idiot isn't crossing when he shouldn't be?

Pretty sure the bike thing works on power too.. a mate had a 650cc dominator (road/trail) which is able to be used on a small bike license as it only had like 33kW.

Also, don't brake-check cops.. they'll do you for dangerous driving (another mate of mine got done for it).

I'm a good boy :down:

Not really an intersection, but there's a rather large pot hole on alexander drive which I hit today because the puddles were hiding it. Yay for almost ripping the tyre off.

Not a single intersection but any round abouts. . (the double lane ones)

Is it just me or does everyone on the outside lane ALWAYS cut into the inside lane and make you get really close to the roundabout?

I cant remember how many times this has happened to me and ive been forced up the curb on the inside of the roundabout. . happens just about every week. .

And like stinky rooster said, the roundabout on armadale rd. . Happens mostly there and the one further up in forrestdale (still on armadale rd)

STAY IN YOUR LANE!!!

Not a single intersection but any round abouts. . (the double lane ones)

Is it just me or does everyone on the outside lane ALWAYS cut into the inside lane and make you get really close to the roundabout?

I cant remember how many times this has happened to me and ive been forced up the curb on the inside of the roundabout. . happens just about every week. .

And like stinky rooster said, the roundabout on armadale rd. . Happens mostly there and the one further up in forrestdale (still on armadale rd)

STAY IN YOUR LANE!!!

I'll admit that I do this, but only if there isnt anyone in sight. Seriously, who is stupid enough to cut someone off? Thats just stupidity.

Also, its a 7 demerit point fine apparently, thats the other reason I only do it when no one is around ;)

  • 5 weeks later...

Gnangara rd and Beechboro rd at peak hr, AVOID LIKE THE PLAGUE!

I've had to hit the skids for a couple of noodles that turned infront of me while heading west on gnangara. And trying to get onto gnangara from beechboro is nearly impossible

I dont know about dangerous but my picks do require a little more vigilance.

Freeway overpass at Hutton st..clowns changing lanes in the turn, then is standard nonsense down to W.A.'s old shop

Walcott and Beaufort. Every yuppie for themselves

Mirrabooka and Reid. I don't know why but there is always evidence of carnage

Right turn exit off Kwinana to Canning...make up you minds ppl, are you going into the Raffles or not?

Leach from Northlake to the Freeway anytime after 3pm on a Friday...Indy 500 without the skillz.

And any place I ride my Triumph

Mirrabooka and Reid. I don't know why but there is always evidence of carnage

I still fail to see how that's dangerous, all the accidents there are because people skip the lights. Fault of the people, not the intersection.




  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...