Jump to content
SAU Community

Recommended Posts

Hi Guys,

Okay, found out that brand new they are 4.05mm each!

If they are 2.75mm each now, would they suit a rebuild OR could i just put them in as is?

Potentially how long could this clutch last for with this knowledge in hand? THanks.

no idea. you need to fine out what the actual thickness is of the friction material not the plate. you need to know the new thickness, and the replacement or minimum thickness.

even that knowledge still doesn't tell you if the intermediate plates are warped? or the diaphragm is shagged.

iv got one on my line. have had it now for 1.5 years been smashing it the entire time. prior owner in japan installed it so not sure how long it has left in it i would say about 20-30% more play. makes so much noise from the floating plate especially in low revs. but for drag racing and pounding the clutch it can take a beating for a long time. im getting rid of mine once it dies as the vibrating noise at low revs gets annoying after a while. lots of other options out there. i love the lightened flywheel that came with it though. revs up very quickly wants to sling shot off into the distance without even giving me warning.

iv got one on my line. have had it now for 1.5 years been smashing it the entire time. prior owner in japan installed it so not sure how long it has left in it i would say about 20-30% more play. makes so much noise from the floating plate especially in low revs. but for drag racing and pounding the clutch it can take a beating for a long time. im getting rid of mine once it dies as the vibrating noise at low revs gets annoying after a while. lots of other options out there. i love the lightened flywheel that came with it though. revs up very quickly wants to sling shot off into the distance without even giving me warning.

From what you have said your clutch must not be fully engaging to be rattling around when your revs are low. If it is rattling abit when your idling at say a set of lights with your foot on the clutch that is normal but to be rattling when your foot is off the clutch and the clutch is engaged should mean something is wrong in my experience. I had an exedy twin plate and never rattled except when i pushed my foot on the clutch.

GTR-PWR. For that price i wold say your better off getting a brand new one. That way you know it will last a long time and everything about it will be new. Eliminates the chance of buying and finding out there is something wong with it like beer baron said. From memory they are only a few hundred more new but that was a couple of years ago.

yeh wouldnt say rattled when foot was off the clutch. but at low revs. it was very noisy. more like a heavy vibrating sound. i was actually not going to buy the car because i bit worried of the noise. but had a vehicle inspection and yeh was just the clutch. 1.5 years later still drives the same. highly recommended for heavy foot pounding though. great for drag racing.

From what you have said your clutch must not be fully engaging to be rattling around when your revs are low. If it is rattling abit when your idling at say a set of lights with your foot on the clutch that is normal but to be rattling when your foot is off the clutch and the clutch is engaged should mean something is wrong in my experience. I had an exedy twin plate and never rattled except when i pushed my foot on the clutch.

No, not necessarily. My Supra's twin-plate (with lightened flywheel) is incredibly noisy at idle with my foot off the clutch (ie: with the car in neutral). In fact, it's a LOT noisier that way than when the pedal is fully depressed. I've had the car inspected and there's definitely nothing wrong with the clutch. Possibly it could be because you've only had a twin-plate with a sprung centre and anti-rattle clips, and maybe yours didn't have a lightened flywheel? That alone can be responsible for a lot of the noise. Mine is the HKS GD Clutch Pro which is the more racing oriented version, which means it doesn't have anti-rattle clips, it has an unsprung centre, and doesn't use the sequential plate engagement system that the Clutch Max uses. Under load, under 2000 rpm, it is INCREDIBLY loud. As in, maybe twice as loud as the car itself. So I think it's just down to the individual clutch/flywheel design?

I've ridden in a Skyline that had a more road oriented Exedy twin-plate with a sprung centre and lightened flywheel and it was considerably quieter than mine. I could only hear the rattle from inside the car (with the windows up) if the engine was at low revs under load, not at idle. It was incredibly easy to drive, too. Mine, however, is a bit of a bitch :sick:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...