Jump to content
SAU Community

Fs: R32 Gts-t $8,500

No.96
 Share

Recommended Posts

No.96 Community Regular

No.96

Posted
Posted (edited)

Make:

Nissan

Model:

R32 GTS-T

Milage:

68 XXX

Transmission:

manual

Colour:

Silver

Location:

South Australia

Complied?

Race only

Price:

$8,500

Contact:

Michael 0404 073 346

Comments / Modifications:

1992 R32 GTS-T

RB20DET 5 speed manual

RACE ONLY

cams log book category 3 Group 3D- sports sedan

Cams approved Full weld in cage by walker chassis

standard engine + ECU 12psi 140 + rwkw

Five puck clutch

4.4:1 viscous LSD shimmed (locked)

B&M line locker

GTR aluminium bonnet

GTR front mount intercooler(not in photo)

HICAS completely removed R31 power steering pump

Whiteline heavy duty adjustable rear sway bar

Tanabe dampers with super low king springs

17x8 advan tri-spoke rims with semi slicks

3inch side pipe

mallala the car did a 1minute 24.50 second lap and a 37.74 at collingrove.

will deliver adelaide metro area

Pictures:

Front

Rear

cams sticker

Cams log book

R32 GTS-T

Edited by No.96
Link to comment
https://www.sau.com.au/forums/topic/230117-fs-r32-gts-t-8500/
Share on other sites
No.96 Community Regular

No.96

Posted
  • Author
Posted

More stuff I forgot

Front strut brace

Engine damper

Also the cage goes through to the top of the rear towers and make the chassis very stiff, just like you like it.

Come on drifters is it too much? The engine and gearbox are as smooth as, I'm selling as I have bought a 32GTR to hillclimb and sprint and mum says I'm not allowed to have two race cars that look the same.

Remember it has a Line locker mate and does fully sic burnouts mate.

Approx $400.00 to deliver to Sydney.

I will take more photo's on the weekend.

Roy Grand Master

Roy

Posted
Posted

Can you PM me your email address? I am interested in some good pictures of the interior and cage, material cage was constructed from, how it goes through the dash, side intrustion etc etc

Also, was the car imported for rego, or strictly race only? LOL will give you a call based on the cage being what i need.

Also things like year model, ABS, functioning air con, condition of body/paint, dash, seats etc, dents/rust etc

No.96 Community Regular

No.96

Posted
  • Author
Posted
Bid offer of $5k. (It's an offer to get the ball rolling so don't take offense).

Will need to inspect closer obviously, but looks clean, is it stock paint?

No offense taken, I like fishing too. But I will have to say no at this stage.

The paint is factory, it is straight as with no rust if I was allowed to have four cars and a Go Kart I would keep it, but apparently the kids need shoes or something.

No.96 Community Regular

No.96

Posted
  • Author
Posted

Took some photo's today, It is very hard to photo the interior of a car so you will have to use your imagination a bit. The car looks better than the photos but it will give you an idea. The Velo and belts aren't included in the sale I want those for the GTR the original GTS-T seats will be bolted/Cable tied back in. The dirty old sheet hanging on the door is so you can see the side intrusion bars.

The photo were taken today the date on the camera is wrong.

post-41741-1217673462_thumb.jpgpost-41741-1217673583_thumb.jpg

post-41741-1217673724_thumb.jpgpost-41741-1217673831_thumb.jpg

post-41741-1217673935_thumb.jpg post-41741-1217674125_thumb.jpg

vitz_n1 Community Regular

vitz_n1

Posted
Posted
Took some photo's today, It is very hard to photo the interior of a car so you will have to use your imagination a bit. The car looks better than the photos but it will give you an idea. The Velo and belts aren't included in the sale I want those for the GTR the original GTS-T seats will be bolted/Cable tied back in. The dirty old sheet hanging on the door is so you can see the side intrusion bars.

The photo were taken today the date on the camera is wrong.

post-41741-1217673462_thumb.jpgpost-41741-1217673583_thumb.jpg

post-41741-1217673724_thumb.jpgpost-41741-1217673831_thumb.jpg

post-41741-1217673935_thumb.jpg post-41741-1217674125_thumb.jpg

Hey mate, will you sepperate parts? im interested in the rims and rear sway bar.

What condition are the tyres in?

I can swap + cash for standard parts so you can sell car complete also.

Cheers

  • 3 weeks later...
  • 2 weeks later...
No.96 Community Regular

No.96

Posted
  • Author
Posted

It is still for sale. Do you know anyone in Adelaide who can look at it? I can get it to the Patrick Car transport Depot. I just got a car from Sydney and it cost $400.00 to transport.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...