Jump to content
SAU Community

Recommended Posts

Hi guys just wondering if anyone could help me with a current probem with my RB20.

My R32 has been a project car and it only came of the shop a few months ago and tuned 3 weeks ago. I spent $10,000 on the engine forging internals, getting the turbo rebuilt, the works. When I got it tuned it was running like a dream (415hp atw on 19psi) and suddenly 2 days ago I was on the way to work and went to hit boost then all of the sudden it wouldn't boost past 10psi and started gargling at 6000rpm (the GT35-40R doesn't come on hard till 5500rpm, car redlines at 8500rpm). At first I thought it might have been the pod filter seeing as it's located in the front bar and it's been wet lately, (so it might have been sucking in oily water which would have clogged the filter), but I replaced the pod filter and it hasn't changed. I'm going to clean the air flow meter the next chance i get. I've checked all the piping and it seems ok. I've checked the spark plugs and gaps, but they were fine. Does anyone have an idea what it could be?

Any help is greatly appreciated. :(

Link to comment
https://www.sau.com.au/forums/topic/230294-help-please/
Share on other sites

It's a Turbosmart bleed valve, i'll check that thanks.

The problem gets worse as you go up in gears too . . . ?

I noticed on the way home 2nite that it's only boosting to 5psi now as well, a massive power loss and it means the problem is gradually getting worse. :P

Link to comment
https://www.sau.com.au/forums/topic/230294-help-please/#findComment-4046953
Share on other sites

Hey again guys,

I desparately need some help on this I have checked all I can think of and my mechanic doesn't know what it could be either. I checked the bleed valve and i think it's fine but i'm not sure what I'm looking at. My car barely drives like a turbo anymore, I don't know what to do.

Absolutely any help at all would be really fantastic,

Thanks - Sean

Link to comment
https://www.sau.com.au/forums/topic/230294-help-please/#findComment-4048720
Share on other sites

if it was mine, i would check the spark plugs first, see what condition they are in then change them with normal copper plugs if they arent already in there.

Then give it a compression test to make sure its all sweet.

what are the specs on the engine, what cams, pistons etc are your running? also what injectors, coils, ecu are you running?

I doubt a bleed valve would cause this problem, it can effect boost but not it missing after 6000rpm. I would be looking more electrical, ie spark.

Edited by R34GTFOUR
Link to comment
https://www.sau.com.au/forums/topic/230294-help-please/#findComment-4048752
Share on other sites

its a leak or a blockage.

Check all intake piping for leaks.. particularly small leaks around the piping joins. Has the car started sounding different at all ? you would hear an exhaust manifold leak if you had one... Could be your BOV not staying shut as pressure builds up... could also be something stuck in the exhaust blocking it up.

btw 310 (approx) rwkw from an RB20... impressive.

Link to comment
https://www.sau.com.au/forums/topic/230294-help-please/#findComment-4048764
Share on other sites

The spark plugs were changed with the tune 3 wks ago and they were copper plated, they wouldn't go that fast would they?

I'll get my mechanics compression tester tomorrow, thanks for that idea

As for the engine:

Turbo full rebuilt

Bored 40thou with CP forged pistons

Spool H-beam rods

Port and polished head

TOMIE adjustable cam gears

standard cams, valves etc (they were machined though)

SARD 550cc injectors

Splitfire coilpacks

Apexi Power FC ecu

That's all that I can think of right now

Link to comment
https://www.sau.com.au/forums/topic/230294-help-please/#findComment-4048802
Share on other sites

its a leak or a blockage.

Check all intake piping for leaks.. particularly small leaks around the piping joins. Has the car started sounding different at all ? you would hear an exhaust manifold leak if you had one... Could be your BOV not staying shut as pressure builds up... could also be something stuck in the exhaust blocking it up.

btw 310 (approx) rwkw from an RB20... impressive.

Thanks heaps I'll check the piping in detail, maybe I need som enew clamps? There has been a weird sound as I accelerate bu it hasn't been very loud, so I didn't think anything of it. Could it also be a gasket? How would I go about checking the BOV?

Thanks for compliment, alot of planning, money and hard work has gone into it (hence why I am currently very distraught). Kind of wishin I didn't do i to the 20 now, should've just got the 26. But I wanted to do something different at the time.

Link to comment
https://www.sau.com.au/forums/topic/230294-help-please/#findComment-4048810
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...