Jump to content
SAU Community

Recommended Posts

hey all just bort an r34 gtt 4 door and was installing a deck when i found a black switch hidden under the handbrake cover. its a black nissan switch with a steering wheel in the middle and sais on and off. its still connected but there is no place where it sits, and when i flick it there is a small tick sound in the dash. any ideas?

Link to comment
https://www.sau.com.au/forums/topic/230658-wats-this/
Share on other sites

nah mate its manual bin trying to find it on google and stuff but still nothin and from what i can tell i dont think its been converted from an auto either

On your dash - can you still see the P R N D down the center? In manual models this area will be blacked out. Another way of telling if your car was an auto is if your steering wheel has + and - buttons (assuming your still using the stock steering wheel).

Link to comment
https://www.sau.com.au/forums/topic/230658-wats-this/#findComment-4055332
Share on other sites

LOL its the switch to turn on teh tiptronic gear changes on the steering wheel, so if ur car is manual, someone has used a auto part in the car, or its been converted to manaul

but yeah what iseecool said

Link to comment
https://www.sau.com.au/forums/topic/230658-wats-this/#findComment-4056431
Share on other sites

thanx for the answers guys.

it doesnt hav the p r n d down the centre of dash and

tiptronic buttons on the steering wheel + its still stock.

and Silver_R34_GT-T what do u mean they have used

an auto part in the car? im assuming it dont do anythin?

Link to comment
https://www.sau.com.au/forums/topic/230658-wats-this/#findComment-4056829
Share on other sites

  • 4 weeks later...

yeah i told you what it was mate, 100%, if u can here it ticking, then your car was auto, and it has had a manual put in...

what i meant by replace something, ( i miss read) i thought u meant under teh shroud it was in the plastic ( as in they had used a plastic part of dash from the auto) not that it was hidden my bad)

we didnt need a picture as the description you gave about the button was spot on.

how did you go with the vin fast?

i tell you what, if i had paid for manual only to find it was originally auto id be pissed...

Link to comment
https://www.sau.com.au/forums/topic/230658-wats-this/#findComment-4107633
Share on other sites

yeah man had it fasted and aparently it was an auto :(

but they did a good job of it, dash and steering wheel,

everythings been changed. also had it checked out by

a mechanic and they recon it was a good job done on

it and well taken care of it only 1 small leak :) .

so im not too pissed about it except they km's are fake,

but i guess they are in most anyway

Link to comment
https://www.sau.com.au/forums/topic/230658-wats-this/#findComment-4114995
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
×
×
  • Create New...