Jump to content
SAU Community

Recommended Posts

Gday guys,

was hoping that you could share your views of the pros and cons of the above question. Obviously if a car is being used on the street as well as race an adjustable seat has functional advantages. But wouldnt this sacrifice some strength though? (i.e. in an accident)

Interested to hear your thoughts..

-Martin

Edited by schtein

I would say that it depends on the seat itself, some of the nicer seat like the bride's or recaro's that are reclinable but still fia approved would be more then fine in an accident. The other thing to concider is legalities as if the car its going into is a 2dr and still has back seats it would be illegal to put fixed back seats in

I have a fixed back in my 4dr 32.

Never gotten any police greife over it.

I lost 10kg out of the car from it.

It much keeps you much more stable than any reclinable I have been in.

It can be a little bit of a challenge at times to get in.. especially as it is my daily and if Iam doing something that requires much enter and exit out of the car it can ge quite frustrating..

In terms of accidents.. I too have thought about it.. but I came to the conclusion that its similar to a bikers helmet.. if you see a crack in the helmet.. the helmet took the impact.. not your head..

I wouldnt really be worried bout it.. if you buy an FIA approved one you'll be fine..

cams don't have an issue with adjustable seats for super sprints/hill climbs etc, but you must run fixed back if you are doing door to door racing

7. only with such replacement seat which in closed cars first registered with CAMS after 1 January 1980, and in which

the relevant regulations permit the replacement of the driver’s seat:

• incorporates a head restraint;

• does not incorporate adjustment of the rake of the squab;

Thanks guys, think the fixed back will be the go- for the drivers side at least. Passenger will go reclinable as i dont want to completely restrict access to the rear seats.

Cheers,

Martin

Just be careful, on that if you have ONE seat fixed back, your legally not allowed passengers in the rear.

Depends what state your in and what the cops are like i guess.

I mean you take a hit to the passenger side, you'll never get anyone out the drivers side

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...