Jump to content
SAU Community

Recommended Posts

Why when you can buy a razo one ! ?

I originally started out making stock ones cause my original one was worm out and when I priced a new one I was quoted nearly $700 ( Ive owned R33s for around 10 years now ) back then from a parts dealer ! ! ! And because of that I decided then to make one that wouldnt wear off the vyln/leather from every day use.

R33AzzA your pics didnt come up ? If I can get a look at the design and see how it works internally I willing to give it a go

Sorry, Hopefully these work. I don't have any internal pics as of yet.

post-43220-1219617192_thumb.jpg

post-43220-1219617297_thumb.jpg

post-43220-1219617386_thumb.jpg

  • 2 weeks later...
  • 1 month later...

What about the 6 speed version for the R34? the stock knob is nice but it's starting to wear in places and I want to keep it.

You could borrow mine for a mould but it's not in tip top shape anymore.

Goddamn, those are sexy - both the gearknobs on my nissans are looking kinda worse for wear, and I'd love to replace em - but trying to find something that looks nice and stock like the factory leather ones has proven extraordinarily difficult -- So what you have here looks f**king *awesome*

Are you planning on making / selling these?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...