Jump to content
SAU Community

Recommended Posts

hey guys, i m driving a 2004 nissan 350GT, just wondering can anyone get the projector headlight, which is the same as 2006+ model?

and i would like to get a HID on the car, anyone in brisbane can recommend me some shops?

thanks guys...

i m having fun 2 drive the car...haha..

Link to comment
https://www.sau.com.au/forums/topic/231877-looking-for-help/
Share on other sites

I was looking at the 2006+ HIDs on ebay.com (USA) just today... The ones from the Infiniti G35 are the same (as they are the same car as the 350GT).

They look pretty damn sexy, and don't cost that much in the scheme of things.

I was looking at the 2006+ HIDs on ebay.com (USA) just today... The ones from the Infiniti G35 are the same (as they are the same car as the 350GT).

They look pretty damn sexy, and don't cost that much in the scheme of things.

does it fit the car?the one u were looking at is come wiz HID?

Yep exactly. As Chris said the US versions are designed for the US roads who drive on the opposite side to us here in Aus, and Japan. So the lean will be on your right side headlight, going into oncoming traffic.

How bad is it? not sure, i know there is one member here who has done the conversion.

I may be able to get my hands on the ballast and ignitors if you want the current headlights to be xenon, but it won't give you projectors.

Cheers

Bobby

The question was about fit and they would :(

Nah you are right. You can also find them on yahoo.jp auctions, use Import Monster or something. Probably looking at $6-700ish/set deliverered if you are lucky. I was trying to keep it simple

Edited by MaXiMuS007

Thanks for the reply guys...

do u guys know if i wanna get a HID CONVERSION KITS on the current headlights, what size of bulks do i need?H1 OR anything else?

and Bobby, r u selling any kind of the HID KITS?

one more question, where can i install the Kits on the car in Brisbane?nice and cheap shops?

thanks again...

Hi Penny,

No I don't sell HID kits but a mate is a bit of a HID guru and does alot of conversions in the motorbike world.

He can get any part of the stock HID kit you need, from Ballasts (which should hopefully still be there as Chris said) to ignitors which are usually cut during compliance.

As an example in my case the Ballast was still there as it forms the cover for the high beam (at the back of the headlight) and I just needed new ignitors. He got these for me for around $100, joined two wires added globes and i was back to Xenon. 30mins work.

If you know what you need let me know and I'll see if he has them. He loves the stock units on the V35's and uses them in a lot of conversions as apparantly they are a nice reliable unit.

Cheers

Bobby

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...