Jump to content
SAU Community

JOINT R31 Dyno Day !@! 28th Sep. CONFIRMATION NEEDED THIS MONTH


Recommended Posts

Sorry Guys,

I haven't been Able to post for a while, as i have had some troubles remembering my password :P

Well The Time is Drawing Nearer And We Need To Get Some Definate Numbers To Ensure That The Day Will Be Going Ahead.

If You Would Like To Send An E-Mail [email protected] With Dyno DAY in the Subject, And Then Confirm That You Will Be Present And What Car You Will Be Putting On The Dyno...

This Should Be A Good Day Providing That We Get The Numbers To Make The Day A Success.

Please Have E-Mails Confirmed By The End Of This Month.

Regards,

Ashley Neal.

www.r31skylineclub.com

[email protected]

http://www.r31skylineclub.com/forum...y;threadid=3977

Hope To Catchup Soon Paul.

. . .

Regards,

Ashley Neal

Edit.......OOps!!! Wrong Thread

It is on barring torrential rain . Gates open 8am. I believe it is $40 for 1/2 day $55 for full day. No special licence reqired, car and driver set up as for drags ie non flammable neck to wrist to ankle and helmet, fire extinguisher is advised but not reqired.

BUT be aware they will be monitering exhaust noise level,..... over 95Decibels and you won't be running until you quieten it down. Place should be easy to find ...follow highway into town watch for Morgan Park sign on the left. Still hav'nt found out if BP Ultimax or Shell Optimax is available in Warrick so last available is on Ipswich highway at Gailes for Shell just before the Logan Expressway joins on and BP 2or3 K's futher on.

15L of Toluene in a tank full would bring Premium at 96 octane safely up past 98oct

Hi There Guys,

I Have a Time Ready

9:00am Dyno Commence. - So I would have to say that it should be 8:30-8:45 Arrival @ All Star Performance @ their new Shop. In Zilmere Road Virginia -

Address 194 Zilmere Road.

Contact : Ashley Neal

[email protected]

0413-491-847

Steven Dyal

0419-767-498

I have So Far Recieved 17 People Confirmed To Come To Make This Possible we need to have 30+ people I'm still waiting on hearing back from the Z car club and Datsun Clubs.

So If you Would Like A Place Please email a confirmation so that you can secure a run for 20$.

This will give you a full read out of the car and how it is performing.

Regards,

Ashley Neal.

www.r31skylineclub.com

[email protected]

  • 3 weeks later...

I already have my name down for this one.

I just got my new clutch in, I was worried for a while there that I wouldnt get it in time for the dyno day as it had to come from sydney from japan I picked it up wednesday arvo and started fitting it 6:00pm I had the car running 1:05am Thursday morning, including new oil in the diff, gearbox and motor + Filter. Not too bad considering I fitted it all on my lonesome.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
×
×
  • Create New...