Jump to content
SAU Community

JOINT R31 Dyno Day !@! 28th Sep. CONFIRMATION NEEDED THIS MONTH


Recommended Posts

Sorry Guys,

I haven't been Able to post for a while, as i have had some troubles remembering my password :P

Well The Time is Drawing Nearer And We Need To Get Some Definate Numbers To Ensure That The Day Will Be Going Ahead.

If You Would Like To Send An E-Mail [email protected] With Dyno DAY in the Subject, And Then Confirm That You Will Be Present And What Car You Will Be Putting On The Dyno...

This Should Be A Good Day Providing That We Get The Numbers To Make The Day A Success.

Please Have E-Mails Confirmed By The End Of This Month.

Regards,

Ashley Neal.

www.r31skylineclub.com

[email protected]

http://www.r31skylineclub.com/forum...y;threadid=3977

Hope To Catchup Soon Paul.

. . .

Regards,

Ashley Neal

Edit.......OOps!!! Wrong Thread

It is on barring torrential rain . Gates open 8am. I believe it is $40 for 1/2 day $55 for full day. No special licence reqired, car and driver set up as for drags ie non flammable neck to wrist to ankle and helmet, fire extinguisher is advised but not reqired.

BUT be aware they will be monitering exhaust noise level,..... over 95Decibels and you won't be running until you quieten it down. Place should be easy to find ...follow highway into town watch for Morgan Park sign on the left. Still hav'nt found out if BP Ultimax or Shell Optimax is available in Warrick so last available is on Ipswich highway at Gailes for Shell just before the Logan Expressway joins on and BP 2or3 K's futher on.

15L of Toluene in a tank full would bring Premium at 96 octane safely up past 98oct

Hi There Guys,

I Have a Time Ready

9:00am Dyno Commence. - So I would have to say that it should be 8:30-8:45 Arrival @ All Star Performance @ their new Shop. In Zilmere Road Virginia -

Address 194 Zilmere Road.

Contact : Ashley Neal

[email protected]

0413-491-847

Steven Dyal

0419-767-498

I have So Far Recieved 17 People Confirmed To Come To Make This Possible we need to have 30+ people I'm still waiting on hearing back from the Z car club and Datsun Clubs.

So If you Would Like A Place Please email a confirmation so that you can secure a run for 20$.

This will give you a full read out of the car and how it is performing.

Regards,

Ashley Neal.

www.r31skylineclub.com

[email protected]

  • 3 weeks later...

I already have my name down for this one.

I just got my new clutch in, I was worried for a while there that I wouldnt get it in time for the dyno day as it had to come from sydney from japan I picked it up wednesday arvo and started fitting it 6:00pm I had the car running 1:05am Thursday morning, including new oil in the diff, gearbox and motor + Filter. Not too bad considering I fitted it all on my lonesome.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...