Jump to content
SAU Community

Recommended Posts

Organising a group buy for a 4wd Adapter Plate for the rb30's.

What's included:

- CNC machined 5083 Billet adapter plate

- Laser cut template to drill & tap & notch the block (If you are in brisbane, i can organise to get these done on the CNC)

- Complete set of High Tensile fasteners

- Instructions for installation

We need 5 orders to get this started.

Price is $575. Usual RRP is $650.

Shipping allow $25

Group Buy ends 26th September.

cheers

Shane

cncadapter001yb6.th.jpgcncadapter002jv9.th.jpginstallingadapter002bs6.th.jpginstallingadapter003zz0.th.jpg

Link to comment
https://www.sau.com.au/forums/topic/232359-rb30-4wd-adapter-plate/
Share on other sites

Very cheap - should sell heaps

Lets hope.

very interested, how do you go about the oil pick up? is the stock one still used? is it safe to use the stock pickup in this kit?

You have to use an external pickup. If you have a look in the last pick you can see one way of doing it. (minus the massive hole)

However if you yourself would like to fabricate an internal pickup, i can have the plate changed to suit.

Everythings detailed in the instructions.

^^ coz u want more cubes are u grow more pubes

does this fit without any modification to the block? i was told you can never get a direct bolt on for this kind of adaptors

have you tried the fitment of these? cheers

can this plate be used on rb25s ? rb20s ?
thread title says RB30 4wd adapter plate

what other else do u think its for?

and yes an rb30 block will give me more cubes over my rb26

i know what it can be used for seems others dont

^^ coz u want more cubes are u grow more pubes

does this fit without any modification to the block? i was told you can never get a direct bolt on for this kind of adaptors

have you tried the fitment of these? cheers

have a read through this thread - http://www.skylinesaustralia.com/forums/Rb...on-t106224.html

also you can see in the last 2 pics in the very first post this plate is bolted to the block and a sump is bolted to the plate, showing that yes it does indeed fit.

Can this be ordered with the internal oil pick up (same as what proengines sells)?

And will the Stagea 4wd sump fit this adaptor?

Edited by inmate
1. Can this be ordered with the internal oil pick up (same as what proengines sells)?

2. And will the Stagea 4wd sump fit this adaptor?

1. At this stage no, however i'll see if i can get a local shop to fab some up - watch this space

2. I dont know, you'll have to investigate to see if the stagea's use the same sump as the gtr's.

  • 3 weeks later...
how much extra for the internal pickup?

will it come with everything to "plug n play"?

nothing extra, i'll throw it in for free :nyaanyaa:

yes, it will come with everything!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...