Jump to content
SAU Community

R32 GTR's (specially 89 model!)


Recommended Posts

heya guys,

been lookin at buyina GTR for some time now and i have found a sik 89 GTR. What does everyone think about that model? Ive heard that the brakes arent too good on them and that parts are hard to find and that buy now machanically they are gettin a bit past their used buy date. I would really love to buy it but just want to get everyones opinion first.

thanks guys

Link to comment
Share on other sites

Cool. Get it man if it'll really make you happy. They are getting on, and as everybody else will tell you, '89 GT-R's have had a hard life, and if they haven't, they cost as much as an R33 GT-R. About the brakes, they're satisfactory IMO, but could do with an upgrade.

Link to comment
Share on other sites

Parts are hard to come by? Doesnt anyone think to call Nissan? The R32 GTR was sold in australia, all spares can be sourced through Nissan.

In fact i've heard you can get spares for 33 and 34's through Nissan now too.

Red17

Link to comment
Share on other sites

I have a 32 GTR and love it. It is an incredibly impressive car. Brakes are pretty bloody good with the right fluids and barke pads. They certainly could be better of course. I persoanlly prefer the 32 to the 33 due to the lightness of the car which makes it more impressive in corners and braking. Not to say that the 33 is not an awsome car.

If you were to be buying a 89 chances are it will be rough and abused so you would need to have a fair bit of money to reco the car. You would need to be able to rebuild the motor if it needed it. I would only want to pay under $15k for an 89 but would be happy to pay $30k for one here that I can drive and test etc.

Mick.

Link to comment
Share on other sites

I recently pm'd Ben Ellis who is the editor of HPI about the 89 GTR's because I was looking into possibly importing one. He told me that there were definately good examples floating around and just basically to be choosy and be prepared for higher running costs. Whether this referred to fixing the RB26 & other parts of that age or just general maintenance I wasn't too sure but it did add some food for thought. The way I see it, there are two sides to the coin and atm the 89 model R's are a bit of an unknown quantity coz nobody has one yet. Until they are finally available to import under the 15yr old rule nobody here will know for sure whether they are worth it in terms of bargain prices. I know i'm hesitant on the gamble. If they are pretty decent, disregarding age, because it all comes down to how they have previously been treated, then they will turn out to be quite a purchase. The general mentality is that once a car reaches a certain age then they become susceptible to a buyers caution (esp with this model Skyline) which isn't the case all of the time. I have been looking at getting a 92/93 model but might wait and see how these 89's fair at the start of next year. Because i really can't justify spending the extra 10k if I can get a decent example and save the 10 g's. The only thing holding me back is the uncertainty of not being able to drive the car. At least with the newer models already in Oz, you can have that peace of mind. The last factor is the comparative value. Once the market starts taking more of these 89 models in i wonder how prices on the 92/93's will fare...of course they will always be higher but I just wonder if they will drop below the $35g mark for decent mildly modded examples?

Link to comment
Share on other sites

Originally posted by GT-Rmgedon

Until they are finally available to import under the 15yr old rule nobody here will know for sure whether they are worth it in terms of bargain prices. I know i'm hesitant on the gamble. If they are pretty decent, disregarding age, because it all comes down to how they have previously been treated

I went down to the wharf here in Kobe 2 weeks ago to see my Pajero, and while I was there I inspected about 6 `89 GT-R`s, and drove one. Basically, they were *used*. The one I drove was ok, had some rock-hard coil overs fitted, but the gear shift action was sloppy as, there were squeaks and rattles while cornering, and scratches, small dents and what have you on practically every panel upon closer inspection... oh, and it had previously been in an accident. On the up-side, the engine seemed solid, no leaks, had a few mods and it pulled really hard.

A mixed bag really, but try and budget 800,000yen ($10,500) for the car at auction. That should get you a decent one for sure.

Link to comment
Share on other sites

I think the price of any R32 GTR will drop by a few $k as a result of the 89 models.. whether they are in great condition or not. Its just increased supply leads to decrease in prices no matter what the condition.

Even assuming a few problems. $10k goes along way in making a rough GTR a very nice one (paint job, replacement suspension, even a few internal fixes).

Personally I'd just be waiting 12 months and seeing how it pans out.. you might miss out on some bargains, but then again, there are going to be a few 89 cars where guys are going need a few $k thrown at them that some people just weren't counting on. When that $17k was all they could scrape together (we're talking about many p-platers here), there are going to be quite a few people where the realities will hit home after a few months.

Thats of course assuming the government doesn't change the whole 15 year scheme..

Link to comment
Share on other sites

Originally posted by SilviaBoy

Hi Rezz

Just curious to know that the 89 GT-R that you test drove, what colour is it?

Cheers

Gun Metal... am I in trouble?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Tryna decide if I should get a skirt coating on my cp 2618 forged pistons that im about to order. Anyone have first hand experience with a forged RB with coated or non coated piston skirts? Is it worth it and does it make much difference? And for people who went with 2618 pistons with no skirt coating how long has your engine lasted? The engine is an rb25/30 and main concern is  that It will be a daily car and will probably see a fair bit of short distance driving, have been told by my machine shop and my tuner that generally a forged engine lasts around 40,000kms before needing a rebuild. Would a skirt coating make much of a difference? cheers 
    • From now on read it as minus 5 and minus 7 instead of dash, and you're correct...
    • Opened up the cluster to inspect the gauge itself for signs of damage and it looks good. Got curious since that needle doesn't go back to a "neutral" position by itself (it stays in the same position when ignition is off. so I manually moved it to 1/2. Connected it back, turned on the ignition and the needle started moving up! Not sure what's up with that but before that the needle was way down below empty like fully south west. There's always a chance that the needle moved slightly the first time I tried and I didn't notice because of how slowly it moves and how far it was from the markings. I don't know if the current needle position is accurate so I'll fill it up and see where that brings it. I guess I'll try to adjust it manually if it doesn't get to F. Looks like the needle position is relative and not absolute? Thanks all for your help and patience!
    • You're confusing two different responders and more than one issue. The stock Neo ECU boost sensor is used by the ECU for protection purposes. It is essentially only an overboost sensor. It is not used for determining engine load for fuelling or ignition purposes. That task falls solely to the AFM. Any aftermarket ECU that either has an onboard MAP sensor or a plug in one, will use the MAP sensor as the primary load sensor. Or I should perhaps say "can", rather than "will", because some of them have the option of using other primary load sensors. That MAP sensor is not for the same function as the stock Neo boost sensor. The reason I recommended against a plug and play ECU is that they are intended to run a particular engine and usually in the car that the particular engine came in. So, if you have a transplanted engine in a different car, with some parts of the original missing (such as the boost sensor, for example) and therefore likely non-standardness of the loom and its insertion into the car's loom, then it is very likely that you will run into the same problems with needing to fix up wiring to make it work that you would with the stock ECU. And, if doing so for the stock ECU is enough of an obstacle that you start considering a standalone plugin as a solution, it should become clear that the plugin is quite possibly not the solution you'd hope it to be. It would just lead to more of the same type of problem solving work to get it going. In the above paragraph and in my earlier post, the lack of the boost sensor is not critical. It was just used as an example of something that we knew you did not have right, such that the stock ECU would not work. I took that as an indicator of a reasonable probability that there were other related problems hiding there.
    • I can think of two places in my city of <1.5million population that specialise in automotive instrument repairs.Unless you're out in the wilds of Quebec, you have 3 major Canadian and 3 major US cities within the same distance as the single nearest city to mine. Surely there is somewhere you could send it.
×
×
  • Create New...