Jump to content
SAU Community

Recommended Posts

Nissan do this, it means you have the special million dollar winning car,

Nah, but unscrew the 4 screws in the speedo, pull it out, check the speedo cable is plugged in properly, if it is, then check the sensor at the other end(gearbox end is still working, follow the cable up, sometimes they snap, if it's buggered just get a new speedo cable, if it's not, then you might need to take it to a mechanic, something must be stopping it from spinning)

If the speedo and P/S are still working, then it shouldn't be a problem with the cable.

The Japanese seem less opposed to fiddling odometers (winding them back). It's possible some sort of damage was done that prevents the odometer going past 100k.

I have the same problem as mine started to play up at 75000kms and fixed itself.

It has now hit 80000kms and wont budge, even the trip meter has stopped.

So I pulled it apart today and had a look seemed easy enough but I couldn't find anything wrong so I just pushed the odometer numbers gently past 80000 with a small screwdriver.

Dunno if this has worked yet as my radiator is out and I cant drive it.

Will let you know as soon as I do tho.

On a side note my boost guage seems to be playing up.

When Im idling the guage reads 0 pressure not vacuum, but when I start to boost it it climbs up.

Also noticed that when the car is off it falls down to 7 deg vacuum.

Any ideas????

I have exactly the same problem.......

the ODO meter stop when reaching 89999kms

yes, four 9 and doesn't go past the 90000kms!

and the trip meter also stopped........

I opened it up and can see nothing wrong

went to wrecker to buy a used one.

realise that the one I had......doesn't have the P, R, N, D, 1, 2......at the centre......

so I am guessing it is for a manual car

and now maybe I could understand why the O/D light doesn't turn on

so what's the reason behind the not running odometer?

i heard that when your car is moving, you shouldn't reset the trip meter..........but I need confirmation about that lol

and also I think it stopped before I reset -_-"

This is what we were concerned about at 5 mins to midnight on 31/12/99 eh?

Had an N13 that did the same thing, and after about 2 months, the odo moved on. Might have been after speed hump rather than a chicane.... Silly isn't it!

Rubber Mallet? I'll LOL if that works!

the car's odometer just stopped in shock when it realised it was the second time it had clicked over 100,000klm :( I guess they wound it back a fair way.

no idea how to fix it but it is pretty common with these cars

pull it apart and look for the cogs from memory there is one white one and severl black ones, check to see if they are all lined up and "meshing" nicely in there, also make sure no damage to the shaft and that everything is plugged in! Gl hame.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
    • Cheers mate. Seems some people get lucky others don't. It looks like the motor was detonating (to be expected if it was overboosting I suppose) as the pistons had a lot of detonation damage, and the bearings were stuffed. The bores were very scoured too, not sure if that's from the pistons or bits of ceramic turbo. By the by now. Have been trying to avoid the rabbit hole too much on the rebuild, and there's been a few hurdles along the way, but with any luck I'll have the car back soon™. Might even pop up a thread then.  
    • Thanks, these seem to lay it out a bit differently. I will get back to you guys after i do some tests and more digging. 
×
×
  • Create New...