Jump to content
SAU Community

Recommended Posts

Hi guys

Picking up my 03 coupe on Friday and want to change the oil that day.

What do you guys use and how many litres will I need?

Thanks

HI jo,

I just bought a 5lts bottle of CASTROL EDGE 0w-50. That's the best oil you can buy for that price, I got 20% off AUD69 when they got a sale in super cheap auto. If you don't do track a lot or crazy stuff, this oil should be good enough for you, safe fuel and runs smoother. Some of the boys here use more expensive stuff like Motul.

do you really have to take off the whole plastic undertray thing to change the oil in the V35s?

Makes it easier and cleaner. I did mine by taking the screws out on the oil drain plug side only, but it can get messy.

If you're simply replacing the oil only you can leave it on, but if you doing the filter you definately need to remove at least half.

And i would recommend changing the filter as well.

  • Like 1
  • 6 months later...
Paragon-

To change teh oil filter you dont need to take off the under tray AT ALL - take the driver side wheel off- it's quicker and easier.

Thankyou. you saved me heaps of time. Shame the filter got stuck on :) . Oh well the screw driver trick to the rescue. And for next time i used the k&n oil filter with the nut on the end to save me future grief :(.

  • Like 1
Paragon-

To change teh oil filter you dont need to take off the under tray AT ALL - take the driver side wheel off- it's quicker and easier.

well faaark me..this method actually works(??).

I'm about to do mine, (when I get her back from the mechanics for gearbox/doorlocks replaced/rotors and pads).

I've never let a mechanic do my oil, and now I can continue this trend on the 35, easier! (I hope!)

I will utilise this method!...sounds ace!.,.....!!!!!!!

A big thankyou!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...