Jump to content
SAU Community

V35 Preferred Oil

jonop2
 Share

Recommended Posts

FlyingEL Rising Star

FlyingEL

Posted
Posted
Hi guys

Picking up my 03 coupe on Friday and want to change the oil that day.

What do you guys use and how many litres will I need?

Thanks

HI jo,

I just bought a 5lts bottle of CASTROL EDGE 0w-50. That's the best oil you can buy for that price, I got 20% off AUD69 when they got a sale in super cheap auto. If you don't do track a lot or crazy stuff, this oil should be good enough for you, safe fuel and runs smoother. Some of the boys here use more expensive stuff like Motul.

NISMO Grand Master

NISMO

Posted
Posted
do you really have to take off the whole plastic undertray thing to change the oil in the V35s?

Makes it easier and cleaner. I did mine by taking the screws out on the oil drain plug side only, but it can get messy.

If you're simply replacing the oil only you can leave it on, but if you doing the filter you definately need to remove at least half.

And i would recommend changing the filter as well.

  • Like 1
  • 6 months later...
Data Queue Enthusiast

Data Queue

Posted
Posted
Paragon-

To change teh oil filter you dont need to take off the under tray AT ALL - take the driver side wheel off- it's quicker and easier.

Thankyou. you saved me heaps of time. Shame the filter got stuck on :) . Oh well the screw driver trick to the rescue. And for next time i used the k&n oil filter with the nut on the end to save me future grief :(.

  • Like 1
superspit Mentor

superspit

Posted
Posted
Paragon-

To change teh oil filter you dont need to take off the under tray AT ALL - take the driver side wheel off- it's quicker and easier.

well faaark me..this method actually works(??).

I'm about to do mine, (when I get her back from the mechanics for gearbox/doorlocks replaced/rotors and pads).

I've never let a mechanic do my oil, and now I can continue this trend on the 35, easier! (I hope!)

I will utilise this method!...sounds ace!.,.....!!!!!!!

A big thankyou!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...