Jump to content
SAU Community

Recommended Posts

T1R's are good because they reach operating temperatues very quickly.

So they are very popular for Motorkhanas and hill climbs.

As for using them as street tyres.. Im not sure if it completely worth it.. you pobably dont reach full operating temps on the street so you may not be completely using the rubber to the most of your advantage..

Im running T1r on front with proxe4's on the rear..

The turn in is excellent with the T1r.. basically point and shoot.. in the wet it's extremely predictable. I've done track days, hill climbs and street driving on this set-up and can't fault it too much.. T1r is the top of the line street tire toyo offer, you can't compare it to the R888 which is a semi slick.. You won't be disappointed with the T1r thought.

Im running T1r on front with proxe4's on the rear..

The turn in is excellent with the T1r.. basically point and shoot.. in the wet it's extremely predictable. I've done track days, hill climbs and street driving on this set-up and can't fault it too much.. T1r is the top of the line street tire toyo offer, you can't compare it to the R888 which is a semi slick.. You won't be disappointed with the T1r thought.

Any reason why you haven't run T1R's at the rear?

I have a pair of T1R's at the front too and found them to be exactly as described above. I have a pair of Hankooks on the rears, as at the time i was just wanting cheap tyres, as these rims are used to "play with". I am now considering going the T1R's at the rear too. The T1R's were purchased 2nd hand for less than half price, with 90% thread, best money ever spent :D

Any reason why you haven't run T1R's at the rear?

I have a pair of T1R's at the front too and found them to be exactly as described above. I have a pair of Hankooks on the rears, as at the time i was just wanting cheap tyres, as these rims are used to "play with". I am now considering going the T1R's at the rear too. The T1R's were purchased 2nd hand for less than half price, with 90% thread, best money ever spent :rofl:

2nd hand for less than half price, with 90% thread...that's make me crazy, why you guys always can get cheap price but good stuff...

how you think the price, $310 for 265/35/18.. I haven't try tempe tyres, hope they can do a better price

2nd hand for less than half price, with 90% thread...that's make me crazy, why you guys always can get cheap price but good stuff...

how you think the price, $310 for 265/35/18.. I haven't try tempe tyres, hope they can do a better price

Not sure mate, never got a quote for that size, doesn't sound bad though. Just get out the yellow pages and call around all the tyre shops, you'll soon find out if it's a good price or not.

Any reason why you haven't run T1R's at the rear?

Bought the T1r a while ago, was chasing a set for the rear 2 days prior to a track day.. couldn't find any, so opted for the proxes.

With that said, I don't think it was a bad move... I found that that the stickier/ better T1rs on the front helped decrease the GTRs front heavy tendency to under-steer due to the proxe4's letting me get tip toey much easier in order to get the car back on track. If it makes any sense ;)

Im running T1r on front with proxe4's on the rear..

The turn in is excellent with the T1r.. basically point and shoot.. in the wet it's extremely predictable. I've done track days, hill climbs and street driving on this set-up and can't fault it too much.. T1r is the top of the line street tire toyo offer, you can't compare it to the R888 which is a semi slick.. You won't be disappointed with the T1r thought.

Me too ;) Well i did

Anyways i ran t1rs on front and ad07s on rear. Both expensive rubber but it was worth every cent :D

Track day - no problems with the t1rs

Wet - no problems either and gripped well.

If i had to buy rubber again i would go with the t1rs :D

2nd hand for less than half price, with 90% thread...that's make me crazy, why you guys always can get cheap price but good stuff...

how you think the price, $310 for 265/35/18.. I haven't try tempe tyres, hope they can do a better price

Thats coz he bought it off me!!

I sold my buddy club p1s and i kept the t1rs thinking i might need it again.. But i never did!! so ended up selling it

Al hows my t1rs going man? I miss it now lol

Edit: i think 310 is a good price for 18s in 265s.

Try tubby tyres (i found them to be the cheapest for t1rs)

Edited by siddr20
T1R's are good because they reach operating temperatues very quickly.

So they are very popular for Motorkhanas and hill climbs.

As for using them as street tyres.. Im not sure if it completely worth it.. you pobably dont reach full operating temps on the street so you may not be completely using the rubber to the most of your advantage..

I think you're thinking of the S-Comp R1Rs or R-Comp RA1s, both of which have low activation temperature requirements that make them popular with hillclimbers and motorkhanas. The T1Rs are a regular street radial, not a motorsport tyre. They shouldn't require any activation temperature.

I wouldn't use an R-Comp as a street tyre. Most require heat to work, which makes them a handful in the wet when you're just tooling around town, and the tyre roar will give you headaches. I daily drove on R-Comps once - my tyres lasted 8000km, the headaches were uncomfortable (turning the stereo up still wasn't enough), and every time it rained I'd have an oversteer moment no matter how careful I was.

If you're having traction problems and you need a grippy tyre, get an S-Comp like the R1R, Falken RT615, Bridgestone RE-01R, or Federal 595RS. They'll work well enough when cold or wet, although I wouldn't be trying to corner carve without warming them up. S-Comps are noisier than regular street radials, but they're nowhere near as bad as R-Comps. Turning the stereo up will get rid of their tyre roar.

If you have no traction issues, the longer life and better wet/cold weather performance or a regular street radial like the T1R is the best bet. They're also cheaper to buy.

Edited by scathing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...