Jump to content
SAU Community

Recommended Posts

Hi All,

It's me again, offloading more spares for/from my car.

Item:Koyo Type S 32mm Copper Core Sports Radiator

Fitment: S13 CA18DE/CA18DET or SR20DET but will require extension to top hose to fit (easy mod) will also fit R32 Skyline, but will sit a little low

Price: $150

Location: Fairfield, NSW

Contacts: PM

Comments: Not some ol' cheapo radiator off eBay, its Koyo! Was destined for my car, then I couldn't be bothered and now I'm selling my car!

More Comments: (off an American Site)

Product Description

Koyo's "S" Sports Series Copper radiators feature OE style copper core brazed to powder coated end tanks for a show quality finish. Koyo uses state of the art Nocolok Brazing Furnace to bond all of the radiator brackets, headers, tubes, and fins, creating high quality "indestructible" radiator.

All Koyo Racing series radiators have "OE Specification" mounting location for stock mounting without major modifications; however we recommend using aftermarket electric fans for the best results. Koyo Hyper Radiator Caps are also available to increase your cooling system pressure to 1.3 bar for increased cooling capacity. Racing series radiators were made for manual transmission only, however with a separate automatic transmission cooler; one can use the Koyo Racing Radiator with automatics for increased cooling capacity.

* Nocolok Brazing

* OE Mounting Specifications

* Tube and Fin Alignment

* Powder Coated Corrosion Resistant

Photos:

rad001.jpg

rad002.jpg

rad003.jpg

Bump? Anyone?

Will fit R32 GTS-t but will not be as tall as the original Radiator, but still better!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...