Jump to content
SAU Community

Recommended Posts

Hi guys, this is my new ride which I've just imported in. It's a manual with an rb20 (non turbo). Has a nice Lsd, lowered suspension all round and some rims (am hoping to get a new full set soon). Imported the car from japan and am getting it ready to meet uk road regulations, only mod on the car I've done so far is the steering wheel. Have had quite a few nissans in the past from a c32 laurel, s13 200sx and my daily drive a 3 door hatch 87 sunny. Here's a few pictures of the cefiro, 1st 1 was taken when the car was in japan..

541720_2.jpg

27082008453.jpg

27082008454.jpg

29082008460.jpg

29082008461.jpg

29082008462.jpg

Edited by Rhin0
Link to comment
https://www.sau.com.au/forums/topic/234089-my-a31-ceffy-uk/
Share on other sites

hey mate haha just cut up your front bar and jam a cooler in there an put sum 9inch wide rims on it and my car will have a twin brother haha, spose you'll need a turbo for a cooler but hey something to look forward too aye

Link to comment
https://www.sau.com.au/forums/topic/234089-my-a31-ceffy-uk/#findComment-4103251
Share on other sites

hey mate haha just cut up your front bar and jam a cooler in there an put sum 9inch wide rims on it and my car will have a twin brother haha, spose you'll need a turbo for a cooler but hey something to look forward too aye

Link to comment
https://www.sau.com.au/forums/topic/234089-my-a31-ceffy-uk/#findComment-4103253
Share on other sites

nice car mate... hehe mine's pretty close to that look right now too with the 16"s... AE86 drivers go gaga for your rear wheels BTW if you're selling em. make sure you capitalise on their infatuations.

oh and be careful of those weatherstrips, after 15 years of being on the car they tend to fly off at speeds over 130km/h.

lol Sloane if you think their backyards are small, you should check out their roads.

Link to comment
https://www.sau.com.au/forums/topic/234089-my-a31-ceffy-uk/#findComment-4105248
Share on other sites

haha yeah this is kinda what yours will look like with cooler and bigger rims, keeping in mind you get a turbo

post-36105-1220272607_thumb.jpg

but def a fan of the rear ssr rims, get those for the front too, look like sum hawt shite then

Edited by TAKUSHI
Link to comment
https://www.sau.com.au/forums/topic/234089-my-a31-ceffy-uk/#findComment-4105572
Share on other sites

Nice car :wub:

damn UK backyards are tiny lol

Yup, you're right there. This is my nan's place though, I don't even have a backyard! ...and our roads do suck, gotta go to an industrial estate to have any fun. Even then the fuzz still give us hassle. :P

Edited by Rhin0
Link to comment
https://www.sau.com.au/forums/topic/234089-my-a31-ceffy-uk/#findComment-4105892
Share on other sites

Yup, you're right there. This is my nan's place though, I don't even have a backyard! ...and our roads do suck, gotta go to an industrial estate to have any fun. Even then the fuzz still give us hassle. :P

Have you ever been to Australia?

would you industrial estate roads be the same size as a normal street here?

BTW ive been to London and geezus christ its expensive lol

Very cold also I came in shorts n thongs cause the plane trip was very hot and got a shock when i hopped off haha

Edited by Greddy Skyline
Link to comment
https://www.sau.com.au/forums/topic/234089-my-a31-ceffy-uk/#findComment-4106848
Share on other sites

Have you ever been to Australia?

would you industrial estate roads be the same size as a normal street here?

BTW ive been to London and geezus christ its expensive lol

Very cold also I came in shorts n thongs cause the plane trip was very hot and got a shock when i hopped off haha

Not yet, my girlfriends dad moved out to australia a while back so we're hoping to come visit soon. Have been thinking about maybe moving out there 1 day.

Everywhere here's expensive these days mate, fuel's on it's way down now but was @ £1.37 for diesel and around £1.24 for unleaded not so long ago. Your normal roads I'm guessing may be similar size to some of our industrial estates but our's are still probably a bit smaller.

Link to comment
https://www.sau.com.au/forums/topic/234089-my-a31-ceffy-uk/#findComment-4108423
Share on other sites

So what sort of mods can I do to get a bit more power (no turbo). I like my cars a bit quiter these days so keeping the stoch back box on the exhaust but looking @ de-cat and 2-1 manifolds.. what modifications are out there?

Edited by Rhin0
Link to comment
https://www.sau.com.au/forums/topic/234089-my-a31-ceffy-uk/#findComment-4116187
Share on other sites

Update on my car, Still not on the road yet.... failed uk mot due to needing 4 new tires, new wiper blades and front coilovers are shot, among other minor bits. Not really impressed with it so far, this is how it arrived from japan. rear completely bold tires front one punctured, drivers electric window stuck half open (bought new switch but seems motor is the problem) and I'm having trouble sourcing one, though am told an r32 4 door one is the same?? So I've just splashed out on a full brand new set of coilovers which I'm well happy with. Just gotta save some more now before I can do anything else. Looking at getting a new set of wheels, and a 2 branch manifold and de-cat when I've got a bit more cash. ....wish it was on the road!

Link to comment
https://www.sau.com.au/forums/topic/234089-my-a31-ceffy-uk/#findComment-4144222
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...