Jump to content
SAU Community

R33 & R34 Bilstein Pss9 Coilovers


cazman
 Share

Recommended Posts

I have just been offered a good deal on multiple sets of these coilovers, but 3 sets are needed to get them at this price, they retail for almost double this

What: R33 & R34 Bilstein PSS9 Coilovers

Price: $2200 +$50max postage aus wide

When: As soon as 3 people put a deposit down, they are in Aus, so 1 week to you door max

Who: Contact myself via PM, Email or phone ~ [email protected]

Height and dampening adjustable, roughly 30-50mm drop is possible, inverted monotube design

Bilstein B16 – PSS9/PSS10 System

This “race inspired” system provides the ultimate in high

performance tuning. The manually adjustable damping

monotube gas shock absorbers feature 9 or 10-stage

precise compression and rebound settings, from comfort

to competition. The threaded body allows accurate

adjustability of the front and rear progressive rate

springs to achieve the vehicle ride height,

center of gravity and

level of performance

handling desired.

The Bilstein B16 system puts

you in complete control

providing the kind of precise

suspension tuning formerly

available only on race

cars. From a weekend of

competition to daily

driving, this system

provides perfect

handling

performance for

every situation.

Image below just for reference

{7B5E8DFA-DA5B-4B9F-00B6-689FDA000D4D}.jpg

For any more info just ask, I dont come onto these forums that much, but i will check back soon

Link to comment
Share on other sites

Sorry they are for R33 & R34 GTRs only, they never did a pss9 for R32 or other gtst, ot that is still available today at least

But don't Bilstein do a coilover for the R32 GTR. I thought they did only recently. It wasn't a pss9.

I remember seeing it advertised for around the $4000 mark complete set.

Link to comment
Share on other sites

  • 2 weeks later...
Guest
This topic is now closed to further replies.
 Share



  • Similar Content

  • Latest Posts

    • I'm in the market for 370GT.  I live in Canberra and not much available so I'm looking interstate.  Can anyone recommend an inspection service with expert knowledge of Skylines? Sydney, Melbourne and Adelaide (Elizabeth area)
    • A million years later, searching for something else I posted, I was reminded of this thread. I eventually bought a new gauge. Put it in using the same probe (which has been installed the whole time stopping the exhaust gas from coming out the hole) and.... normal service has been resumed. The old gauge was definitely broken. /semi-pointless closure.
    • They're available from Nissan! I was able to buy a GTR (R33) one.. relatively* recently. Perhaps this stopped now but I bought mine ... relatively recently. I believe the 300ZX one has a different knee-point which is more rear biased, which I think the HFM one echos.
    • Hey Team, A bit to unload here. Hello from New Zealand I have a 2009 Nissan Skyline 370GT ( Type SP ) Auto 7 Speed, that I've had since 2022 and have loved the car since. Its painted in its factory QAB ( White Pearl ) with the Impul front lip and rare boot lid/spoiler with woodgrain interior. Mods since I've bought it and installed: Stillen Gen 3 Long Tube Intakes Motordyne Shockwave Catback Exhaust JDM Skyline Taillights Fake carbon spoiler and front grill ( Will be taking off.... its cringe ) VR30DETT Transmission from the Q50/Q60 to hold up to 550 Foot pounds of Torque ( 753 nm ) reliable  Currently I plan to turbo the car and have all the parts needed ( Photo Included ), I have my tuning day set on August 8th and choosing EcuTek as my tuning platform. Two of my work colleagues has their 370Z ( Manuel ) and 370GT coupe ( Type SP - Manuel ) also turbo'd and they have inspired me to get it done I have prepped quite a wee bit for this, as I had done the VR30 transmission swap over to this car so that I can achieve my HP goals without torque being an issue. I've taken quite a cautions route, as im always thinking about the safety as well as performance with my build, I'd rather do it properly and not cut corners etc etc. Any who, I've recently picked up the AutoStrada cruise control kit with all the included cables/wires/instructions. I've been hella researching around and can't find much on the integration that it has with the ECU and/or system. the only reason why im asking is, because I'm getting EcuTek and one of them RaceRom features allows the ability to switch maps via the cruise control function, which I am currently in the grey area if this would add-on via the Canbus will allow me to switch maps or have the option to use Cruise Control to begin with ( showing up on the instrument cluster to advise Cruise Control being set etc etc )  Because of my model being Type SP, Cruise Control on these models was never an option from factory unfortunately.  Anyone here that is able to shed some light on if the Cruise Control via AutoStrada gives OEM ability over the cruise control. Would love and appreciate any response and/or assistance with this, also happy to answer any question about my build and ill try pitch in where I can. Warm Regards,  
    • I thought the only (new) BM57 that was readily available was the one that was a BM57 but with the wrong bias. HFM or someone's?
×
×
  • Create New...