Jump to content
SAU Community

Quit Targa West

Marlin

By Marlin,
in Motorsport Discussion & Builds

 Share

Recommended Posts

Snowman Grand Master

Snowman

Posted
Posted

When I last chatted to him he said he was looking at Mt Buller next but it was a toss up between that and Dutton NSW (he is leading the drivers comp in the Dutton National but a) I don't think he can lose it and b) I heard Gazzard wasn't doing NSW anyways and c) I think he might be more keen on the full rally stuff now anyways).

But as for all the fanboys with the "street tyres" comments - I know there aren't any true R Comps in 20's yet but I also know Steve did a bunch of tests on different compound tyres before going with those Dunlops (I don't think they are the option ones delivered with the car but are something else?? When I was over with him at a testing day earlier this year I noticed they had a very blocky tread block similar to the Kuhmo Semis) But if you look at some of the results around the world with even things like all these cars running sub 7:30 at the Nurburgring on these "street tyres" I think we can all safely say that these tyres actually stack up pretty well to an R Comp over short runs. I know I was blown away with the lap times we recently did at Phillip Island in the Audi R8 on a set of these new wave "street tyres". But they did drop off after say 2-3 laps or say 5mins of heat but Targa West has hardly any longer stages and I think the long ones was where Steve struggled the most yeah?

Marlin Grand Master

Marlin

Posted
  • Author
Posted

Well said Snowy, I'm not privvy to anything that Steve ran, but agree these new gen "street tyres" must be something a bit speccy considering the 'ring times etc. Given there's not too many really long stages in Aus rallying (longest is Arrowsmith @ 47.8klm) these tyres might not be as bad as i first feared?

I do think it's important to remember that Tugga West is by all accounts a very fast rally, favouring the big top end cars like the R35 and Porsches. Other rallies in my opinion will hold a much better indication of how good the 35 is going to be, and whether weight will have a significant bearing on the performance. Of course, this may or may not be clear until a few tyres are developed to suit the car.

But again, props to the crew, Steve is obviously a very very good steerer, and don't forget his nav was right there for him calling the shots, and would need balls of steel to get a "new" guy to rallying going that quickly.

Snowman Grand Master

Snowman

Posted
Posted

Yeah I hope he brings the car to Mt Buller. That will be a great test as it's uphill (obviously) so we'll see how the weight effects it and its all 10min runs so again we'll see how that effects the tyres.

Are you doing it Ben?

Marlin Grand Master

Marlin

Posted
  • Author
Posted

Not at this stage :) Can't afford the time really, but doing Rally Burnie with Russ which will be friggin awesome, and with any luck I'll get to Buller to party saturday and sunday. YT wants me to go, he reckons he has a score to settle re the slap comp at the bar last year. lol

260DET Experienced

260DET

Posted
Posted

For street tyres I think most people understand them to be genuine street legal and suitable for everyday use, compared with R comps/semi slicks which are really competition tyres which do not suit everyday use. The dividing line between the two may be thin but its there.

FranZ Enthusiast

FranZ

Posted
Posted

Incar vid of Steve Jones and Ruari Soutar-Dawson in the R35 GTR.

SS09: Mcness 2: http://au.youtube.com/watch?v=P4LnkJH20Yo

SS05: John Forrest 2: http://au.youtube.com/watch?v=0FGI9VPBr_E

More stages are going to be online in the next few days.

Personally, Mcness is my favourite.

dan_the_man Grand Master

dan_the_man

Posted
Posted
Incar vid of Steve Jones and Ruari Soutar-Dawson in the R35 GTR.

SS09: Mcness 2: http://au.youtube.com/watch?v=P4LnkJH20Yo

SS05: John Forrest 2: http://au.youtube.com/watch?v=0FGI9VPBr_E

More stages are going to be online in the next few days.

Personally, Mcness is my favourite.

wow...!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...