Jump to content
SAU Community

Recommended Posts

Make:

Nissan

Model:

Skyline

Milage:

170xx (gotta confirm)

Transmission:

Manual

Colour:

Black

Location:

Victoria

Complied?

ya

RWC supplied?

no but it had an rwc done few months back

Currently registered?

yes

Price:

8500 or above, swaps welcome

Contact:

pm on here

Comments / Modifications:

Ok been thinking about it for the last 3-4 days ... insurance is not worth it and i really dont want to keep this car outside on the street in the northern suburbs ... it deserves someone who will drive it and take care of it.

Bought it 4 or so months ago ... has plenty of rego and was recently RWC'd. theres a slight dent near the front indicator which i will repair before selling ... other than that the car is one of the cleanest r32's I've seen around. Very good base for someone looking to modify.

Mods include:

Boost controller set at 14 psi ( AFR etc recently checked on a dyno )

Nice sounding exhaust (3 inch cat back or turbo back, not sure)

front and rear strut bars

apexi pod filter

mp3 headunit

lowered as well i think

Apexi boost gauge

sports steering wheel (not in pic)

Pager alarm

The only problem with the car is that theres a slight clunk sometimes when releasing the clutch which just needs adjustment i think.

I'm happy to assist you with getting any tests etc done on it. Genuine reason for sale ... you can do whatever test etc you want.

I would prefer a swap with any car that does not attract alot of attention but doesn't look like i borrowed it from my mum for the day. Anything decent on petrol and cheap to insure. Turbo's are out of the question i guess :P

If someone wants to buy it ... I would be looking at offers over $8500.

I'll put details on rego and km's etc soon as well. The car can be viewed in pascoe vale anytime after business hours or on the weekends. Please no negative comments ... i'll be putting it up on carsales soon as well. An inspection won't disappoint :)

DSC00182.jpg

DSC00249.jpg

DSC00169.jpg

Edited by agentx
Link to comment
https://www.sau.com.au/forums/topic/235742-fs-or-swap-r32-gtst/
Share on other sites

some more info :

car has tints ... is 173,xxx genuine km's ... lowered as well and clutch was recently replaced. Also has rego till 05/09. I've had quite a few pm's for swaps and offers as well ... please note that 8.5k is a very reasonable price for it and it'll be hard bringing me down lower then that.

Also to add, the car has never seen redline with me ... i barely took it over 6.5k revs ... never thrashed ... and the last owner was a very mature professional as well.

It still has the manuals etc .. and an emergency flashbang or something as well haha

Edited by agentx
whats that slight cluck?

backlash? can you fix that? keen as

its not backlash, its just a clunk noise that sometimes happens when you're disengaging the clunk. The car is perfectly driveable and this has no effect on gearshifts etc. You cant hear it but you can feel it.

I have priced the car seeing as it has that fault. The only other fault i forgot to mention is a screaming sound that comes from the engine bay on boost. I guess thats a manifold gasket leak? again, doesn't affect driveability as the car goes pretty alright:) but you might want to get the gasket changed ... or change it yourself if you know a bit about cars.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...